We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with two HDMI inputs and multiple audio outputs

Vszerda

Vszerda 2x1 HDMI 2.0 Audio Extractor Switch 4K@60Hz ARC 7.1CH

SKU CH-KVNY-51JQN

A 2×1 HDMI 2.0 switch with audio extractor passes 4K at 60 Hz and splits sound to optical, coaxial, 3.5 mm and HDMI ARC outputs with 7.1-channel support

  • Switch two sources to one display with audio extraction
  • Extract sound via HDMI, optical, coaxial and 3.5 mm jack
  • Supports 4K at 60 Hz with HDCP 2.3
  • Handles 7.1-channel formats including Dolby Atmos and DTS:X
  • ARC and eARC support for TV audio return

Two-in-one HDMI 2.0 switch with audio extraction

This Vszerda unit combines a 2x1 HDMI 2.0 switch with an audio extractor for setups that need to route two sources to one display while sending sound to a separate audio system. It handles 4K at 60 Hz with HDCP 2.3 and passes 10-bit HDR video. The switch is suited for consoles, streaming boxes or PCs where the display lacks audio outputs or the receiver lacks HDMI 2.0 inputs.

Passive operation keeps thermals and noise absent

The device draws power from the HDMI sources and an included USB power cable, so it adds no fan noise or measurable heat to a rack. Typical draw is well under 10 watts and the enclosure stays at room temperature during continuous 4K 60 Hz playback. No active cooling is required and the unit is silent in normal use.

Four-mode audio toggle and multiple output ports

A 4-position switch selects PCM 2.0, 5.1, 7.1 or pass-through formats including Dolby Atmos and DTS:X. Extracted audio is available simultaneously on optical Toslink, coaxial, 3.5 mm jack and the HDMI ARC/eARC port. This lets older AV receivers, soundbars or powered speakers work with modern 4K sources without firmware updates or extra converters.

Highlights

  • Switch two sources to one display with audio extraction
  • Extract sound via HDMI, optical, coaxial and 3.5 mm jack
  • Supports 4K at 60 Hz with HDCP 2.3
  • Handles 7.1-channel formats including Dolby Atmos and DTS:X
  • ARC and eARC support for TV audio return

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the two HDMI sources and select between them?

Connect each source to the two HDMI inputs, link the HDMI output to your display, then press the front toggle to switch between inputs. The step often missed is matching the 4-speed audio-format switch — TV, 2.0, 5.1 or 7.1 — to your sound system before powering on.

Will the optical Toslink or coaxial ports wear out and need replacement?

The Toslink and coaxial connectors are passive and have no moving parts, so they do not wear out under normal use. Only the mechanical input selector button and the 3.5 mm jack see repeated physical contact and may eventually need attention.

At what resolution and refresh rate does the extractor stop passing HDR video?

The unit is rated for 4K at 60 Hz with 10-bit HDR and HDCP 2.3. Pushing beyond 60 Hz or using an unsupported colour space will cause the video path to drop out first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.