We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two Mini-SAS SFF-8088 cables each splitting to four SFF-8482 connectors with power leads

Vszerda

Vszerda 2PCS Mini-SAS SFF-8088 26P to 4X SFF-8482 29P with Power Cable 1M 3.3FT

SKU CH-XD07-H1F2S

Two Mini-SAS SFF-8088 cables split to four SFF-8482 connectors with power, supporting 6.0 Gbps SAS links

  • SAS 6.0 Gbps bandwidth for high-throughput storage
  • Mini-SAS SFF-8088 to four SFF-8482 connectors expands drive connectivity
  • Integrated 4-pin power cables simplify drive installation
  • One-metre length suits rack and workstation layouts
  • Two-cable pack provides spare or dual-controller redundancy

Mini-SAS SFF-8088 to four SFF-8482 cables

This set includes two new cables that convert a 26-pin Mini-SAS SFF-8088 connector into four 29-pin SFF-8482 connectors. Each assembly also supplies four integrated power leads and measures 1 metre or 3.3 feet in length. The links carry Serial Attached SCSI traffic at up to 6.0 Gbps per lane for high-throughput storage access.

Suits external storage.

Administrators connecting external storage arrays, SAS expanders, host bus adapters or RAID controllers to a Mini-SAS SFF-8088 port will find the pinout and power delivery they need. Builders who require internal-only connectors, higher lane speeds or cable runs beyond one metre should consider other options.

Single-lane bandwidth ceiling of 6.0 Gbps

The specification that decides fit is the 6.0 Gbps per-lane limit carried over the SFF-8088 to SFF-8482 interface. If the target subsystem demands faster signalling, these cables will not meet that requirement.

Highlights

  • SAS 6.0 Gbps bandwidth for high-throughput storage
  • Mini-SAS SFF-8088 to four SFF-8482 connectors expands drive connectivity
  • Integrated 4-pin power cables simplify drive installation
  • One-metre length suits rack and workstation layouts
  • Two-cable pack provides spare or dual-controller redundancy

Specifications

No published specifications for this item yet.

Questions about this item

What host adapter or RAID controller port does the SFF-8088 26-pin end plug into?

The SFF-8088 26-pin connector fits any external mini-SAS port on a host adapter, RAID controller or SAS expander that uses the standard 26-pin interface.

Will the four SFF-8482 29-pin connectors drive older 3 Gbps SAS hard drives?

Yes, each 29-pin connector supports up to 6.0 Gbps and is backward compatible with 3 Gbps SAS drives.

How can I confirm the 6.0 Gbps link is active after connecting the cable?

Check the host adapter or RAID controller BIOS and operating-system device list for a negotiated 6.0 Gbps link speed on each attached drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.