We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue Mini-SAS SFF-8087 to four SFF-8482 cables with SATA power adapters, 0.5 m

Vszerda

Vszerda 2Pack Mini-SAS SFF-8087 to 4x SFF-8482 SAS Cable 0.5M with SATA Power Adapter

SKU CH-1C15-73A7C

Two-pack of 0.5 m Mini-SAS SFF-8087 to four SFF-8482 breakout cables with integrated SATA power adapters for 6 Gb/s drive connections

  • TypeMini-SAS Cables
  • ColorBlack/Blue
  • Length1.6
  • Speed6 gigabits_per_second
  • ConductorCopper
  • FeaturesSFF-8087 to SAS 0.5M
  • Connect up to four drives per cable using SFF-8087 to 4× SFF-8482 breakout
  • Each SFF-8482 connector includes SATA 7-pin data and 15-pin power adapter
  • 6 Gbps per drive transfer rate over 0.5 m copper conductors
  • 30 AWG flexible cables simplify routing inside the chassis
  • Two-cable pack provides eight total SFF-8482 connections for storage expansion

Two-pack internal SAS breakout cables

This two-pack provides two 0.5 metre Mini-SAS SFF-8087 to 4x SFF-8482 breakout cables for connecting a SAS HBA or RAID controller to four SAS or SATA hard drives. Each cable is designed for internal storage expansion in servers or workstations. The host end uses a 36-pin SFF-8087 male connector while each target end presents an SFF-8482 connector.

SATA power adapter integrated per drive

Every SFF-8482 connector includes a built-in SATA 7-pin data and 15-pin power adapter so each attached drive receives both signal and power from a single breakout lead. The cables are labelled to simplify routing and cable management inside the chassis. A separate SATA power supply cable must be attached to each adapter connector for the drives to operate.

6 Gb/s per drive transfer rate

The assembly supports a data transfer rate up to 6 Gb/s per connected drive using 30 AWG copper conductors. Note that the SFF-8087 host connector must attach to the controller side and not to a backplane; the breakout will not function if connected in reverse.

Highlights

  • Connect up to four drives per cable using SFF-8087 to 4× SFF-8482 breakout
  • Each SFF-8482 connector includes SATA 7-pin data and 15-pin power adapter
  • 6 Gbps per drive transfer rate over 0.5 m copper conductors
  • 30 AWG flexible cables simplify routing inside the chassis
  • Two-cable pack provides eight total SFF-8482 connections for storage expansion

Specifications

BrandADCAUDX
ModelMini SAS-009
TypeMini-SAS Cables
ColorBlack/Blue
Length1.6
Speed6 gigabits_per_second
ConductorCopper
FeaturesSFF-8087 to SAS 0.5M

Questions about this item

Will the SATA 15-pin power adapters on the 4x SFF-8482 connectors need periodic replacement?

The adapters are passive copper assemblies rated for 6 Gb/s; they have no moving parts or active electronics, so no scheduled replacement is required under normal use.

What throughput ceiling appears first when the 0.5 m SFF-8087 link runs continuously at 6 Gb/s per drive?

Each SFF-8482 breakout is specified at 6 Gb/s, so the per-drive SAS 6 Gb/s signalling rate is the limiting factor before cable length or conductor gauge becomes a bottleneck.

How much heat or noise does the 30 AWG copper cable assembly produce during all-day operation?

The cable is a passive 30 AWG copper assembly with no active components, so it generates negligible heat and zero audible noise regardless of duty cycle.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.