We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat ribbon cable with straight SFF-8654 8i connectors at both ends, pale blue finish

Vszerda

Vszerda 24G SlimSAS SFF-8654 8i SAS Cable .5m 11# Straight

SKU CH-43GM-EEMTG

Internal SlimSAS SFF-8654 8i cable carries 24Gbps SAS 4.0 traffic over a .5m straight ribbon

  • TypeInternal SlimSAS Cable
  • Color11#: Straight
  • Length0.5
  • Connector DetailSff-8654 to Sff-8654 8i
  • Terminal GenderMale-to-Male
  • SpecificationsInternal SlimSAS Cable
  • 24Gbps data rate for high-speed storage throughput
  • 100-ohm impedance and 32AWG conductors maintain signal integrity
  • SAS 4.0 compliant for modern server and NVMe deployments
  • Straight 74-pin SlimSAS connectors enable dense internal routing
  • 5-metre length suits compact chassis and backplane layouts

SlimSAS SFF-8654 8i cable for high-density servers

This Vszerda internal cable connects two SFF-8654 8i ports using a straight 11# plug design. It supports data rates up to 24Gbps with 100 Ohm impedance over a .5 metre length. The 32AWG ribbon construction uses 74 pins to maintain signal integrity in dense chassis. It complies with the SAS-4 standard extended to SAS 4.0 for modern storage workloads.

Straight plug installs in tight bays

The straight 11# connector orientation keeps the cable close to the backplane, reducing bend radius issues in 1U or 2U servers. Ribbon layout simplifies routing between adjacent drive cages or NVMe backplanes. Ensure both endpoints use SFF-8654 8i receptacles; mismatched pin counts or angled ports will prevent seating. No tools are required beyond finger-tightening the latch.

Suits integrators building SAS 4.0

Builders needing longer runs or right-angle plugs should select a different length or connector style. The .5 metre reach limits use to intra-chassis links only. Systems requiring shielded external cabling or different pin configurations are not compatible.

Highlights

  • 24Gbps data rate for high-speed storage throughput
  • 100-ohm impedance and 32AWG conductors maintain signal integrity
  • SAS 4.0 compliant for modern server and NVMe deployments
  • Straight 74-pin SlimSAS connectors enable dense internal routing
  • 5-metre length suits compact chassis and backplane layouts

Specifications

Brandipolex
TypeInternal SlimSAS Cable
Color11#: Straight
Length0.5
Connector DetailSff-8654 to Sff-8654 8i
Terminal GenderMale-to-Male
SpecificationsInternal SlimSAS Cable

Questions about this item

How can I verify the 24Gbps link is active after connecting the SFF-8654 8i cable?

Check the host controller or RAID utility for a negotiated 24Gbps link speed on each of the eight lanes and confirm zero CRC errors during sustained I/O.

What comes in the box and do I need any extra brackets or adapters for a straight 11# plug?

The package contains the single .5 m SlimSAS SFF-8654 to SFF-8654 8i cable; no brackets or adapters are included and none are required for the straight 11# plug.

Which cable version should I choose for a 100 Ohm, 32AWG, 74-pin internal SAS 4.0 connection?

Select the 11# straight variant — it matches the 100 Ohm impedance, 32AWG ribbon construction and 74-pin high-density plug specified for SAS 4.0 internal I/O.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.