We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-pin dual PSU adapter cable, 32 cm length, straight connectors

Vszerda

Vszerda 24 Pin Dual PSU Adapter Cable 32 cm/12.6 In

SKU CH-PFR6-4ANB2

Connects two ATX power supplies to one motherboard for simultaneous startup using a 32 cm dual-PSU adapter cable

  • Starts both PSUs from one motherboard button
  • Adds a second PSU for extra graphics-card power
  • Works with 24 pin and 20 pin ATX boards
  • 32 cm length fits tight dual-PSU builds
  • Motherboard draws from one PSU only for safety

Dual PSU Adapter for 24-Pin and 20-Pin Boards

This 32 cm adapter cable lets a single motherboard start two ATX power supplies at the same time. It is intended for miners and multi-GPU builders who need extra wattage without replacing their original unit. The board draws power from the primary PSU while the secondary PSU feeds graphics cards or other peripherals. Both units switch on together when the case power button is pressed.

Suits Rigs Needing a Second PSU.

The cable is useful when the chassis can hold two supplies and the workload exceeds one unit's capacity. It does not help systems that run happily on a single PSU or cases with room for only one unit. Buyers who want modular cables, sleeved extensions or a higher-wattage single supply should look elsewhere. No other connector types or voltage rails are provided by this adapter.

32 cm Length Decides Fit in Your Chassis

The fixed 32 cm (12.6 in) lead sets the maximum distance between the two PSU 24-pin sockets. Measure the gap in your case before ordering; a longer run will require a different cable. The adapter carries only the ATX start signal and ground wires needed for simultaneous power-on. No additional lengths or pin configurations are included.

Highlights

  • Starts both PSUs from one motherboard button
  • Adds a second PSU for extra graphics-card power
  • Works with 24 pin and 20 pin ATX boards
  • 32 cm length fits tight dual-PSU builds
  • Motherboard draws from one PSU only for safety

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard connector does this adapter require to power both PSUs simultaneously?

The cable plugs into a 24 pin or 20 pin ATX motherboard socket and sends the power-on signal to the second supply when the board is switched on.

Can I keep my existing PSU in the case while adding a second unit with this cable?

Yes, the adapter lets the original PSU power the motherboard while the extra PSU feeds graphics cards or other components, provided the chassis has room for both units.

How do I confirm both power supplies start together after connecting the adapter?

Press the case power button; the motherboard PSU and the secondary PSU should spin up at the same moment, showing the cable is passing the on/off signal correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.