We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 24-pin ATX male-to-female extension cable, 8 inches, 18AWG copper

Vszerda

Vszerda 24 Pin ATX 2.01 EPS Extension Cable 8 Inch 18AWG

SKU CH-0TJQ-HRFT8

An 8-inch 18AWG extension cable adds reach between a 24-pin ATX 2.01 power supply and motherboard

  • Extends ATX 2.01 power reach by 8 inches
  • Male-to-female 24-pin connectors fit standard motherboard headers
  • 18AWG tinned copper conductors carry 3.3, 5 and 12 V DC reliably
  • Adds strain relief for PSU cables in large or complex chassis
  • 8-inch length provides routing space inside the case

Extension Cable for ATX 2.01 Power

This Vszerda cable extends a 24-pin ATX connection by eight inches using 18AWG tinned copper conductors. It carries a male and a female EPS 24-pin connector to bridge the gap between a power supply and motherboard. The cord handles 3.3, 5 and 12 V DC lines for standard desktop power delivery. It is built for internal use in custom or large-chassis builds.

Check Connector Orientation and Clearance

Verify that your power supply and motherboard both use standard 24-pin ATX headers before ordering. Ensure the eight-inch reach matches the routing path inside your case without stretching or sharp bends. Confirm there is enough space around the motherboard socket for the female connector to seat fully. The 18AWG wire gauge suits typical desktop current loads on each rail.

Replaces Short Factory Leads in Big Cases

This extension replaces the need to reposition a power supply when its native cables fall short of the motherboard socket. It upgrades from makeshift splicing or daisy-chained adapters by providing a single, purpose-made link. The jump is worth it when cable management demands a clean, direct run across a wide chassis or behind a custom loop. Builders who need multiple extensions or right-angle plugs should look elsewhere.

Highlights

  • Extends ATX 2.01 power reach by 8 inches
  • Male-to-female 24-pin connectors fit standard motherboard headers
  • 18AWG tinned copper conductors carry 3.3, 5 and 12 V DC reliably
  • Adds strain relief for PSU cables in large or complex chassis
  • 8-inch length provides routing space inside the case

Specifications

No published specifications for this item yet.

Questions about this item

Does the 24-pin ATX 2.01 extension ship with any extra adapters or do I need to buy them separately?

The cable is a single 24-pin male-to-female extension; no extra adapters are included or required for standard ATX 2.01 connections.

Should I pick the 8-inch or 6-inch length for a large chassis build?

The supplier title lists 8 inches while the specification table states 6 inches; choose the length that matches the clearance you measured inside your case.

Will 18AWG tinned copper conductors handle 12 V, 5 V and 3.3 V rails without voltage drop?

18AWG tinned copper is rated for the 3.3 V, 5 V and 12 V DC rails carried by a 24-pin ATX connector, providing reliable power delivery across the short extension.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.