We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two flat blue cables with 22-pin SATA female ends splitting to 7-pin SATA female and 4-pin Molex male connectors, 50cm long

Vszerda

Vszerda 22Pin SATA 7+15 to 7Pin + IDE 4Pin Combo Cable 50cm 2pcs

SKU CH-K36H-HWWCF

Two 50 cm cables split a 22-pin SATA connector into 7-pin data and 4-pin Molex power for 2.5" or 3.5" drives

  • TypeSATA
  • Connector DetailSata
  • Terminal GenderMale
  • Speed6 gigabits_per_second
  • FeaturesData Transfer
  • 6 Gbps data rate with SATA 3.0 support
  • 22-pin female to 7-pin female plus IDE 4-pin male combo
  • Protects original ports from wear with extension design
  • Flat PVC and nylon braided sheath for easy routing
  • Two 50 cm cables included for flexible installation

Versatile 22-pin SATA combo cable

This two-piece set converts a single 22-pin SATA port into a 7-pin data connector and a 4-pin Molex power plug. It suits builders adding 2.5" or 3.5" drives to boards or backplanes that only expose the combined interface. The 50 cm length reaches most internal bays without excess slack. It is not for users who need straight-through 22-pin extension or eSATA external connectivity.

Cool running with minimal clutter

Flat PVC and nylon-braided jackets keep the cable thin and flexible, helping airflow inside tight chassis. Pure copper conductors carry 12 V and 5 V lines alongside 6 Gbps data without added active circuitry. No extra power draw or fan noise is introduced. The passive design means thermals stay identical to a direct drive connection.

Replaces separate data and power leads

The combo cable removes the need for a dedicated SATA power cable from the PSU when a Molex source is available. Upgrade from jury-rigged adapters when drive density or cable routing makes individual connectors impractical. The jump is worth it when drive swaps are frequent and preserving the original 22-pin port matters.

Highlights

  • 6 Gbps data rate with SATA 3.0 support
  • 22-pin female to 7-pin female plus IDE 4-pin male combo
  • Protects original ports from wear with extension design
  • Flat PVC and nylon braided sheath for easy routing
  • Two 50 cm cables included for flexible installation

Specifications

BrandYARCHONN
ModelYR-250050DL1
TypeSATA
Connector DetailSata
Terminal GenderMale
Speed6 gigabits_per_second
FeaturesData Transfer

Questions about this item

How do I connect the 22-pin female end and the 7-pin plus IDE 4-pin male ends?

Plug the 22-pin female connector into the drive's combined port, then attach the 7-pin male to the motherboard SATA socket and the 4-pin male to a Molex power lead; the flat 50 cm cable routes easily in tight cases.

Will the copper conductors or PVC and nylon sheathing degrade over time?

The oxygen-free copper cores and mixed PVC-nylon jacket are rated for long-term use; no periodic replacement is needed unless physical damage occurs.

At what point does the 6 Gbps data rate become the bottleneck?

The cable supports SATA 3.0 at 6 Gbps, so the link itself is the first limit under sustained transfers; drive and controller performance will determine actual throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.