We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five white 20-pin to 24-pin power adapter cables 14cm 18AWG

Vszerda

Vszerda 20-pin to 24-pin internal power cable 14cm 18AWG 5-pack

SKU CH-QC7Z-KADY9

Pack of five 14 cm cables convert a 20-pin PSU connector to a 24-pin motherboard socket using 18 AWG wire

  • Converts 20-pin PSU to 24-pin motherboard
  • 14 cm length fits tight chassis spaces
  • 18 AWG wire handles standard power loads
  • White plastic shells protect connector pins
  • Five cables included for multiple builds

20-pin to 24-pin ATX adapter pack

This five-pack of internal power cables converts a 20-pin ATX supply connector to a 24-pin motherboard socket. Each cable measures 14 centimetres and uses 18AWG wire. The white plastic shells protect the contacts during installation. Builders restoring older power supplies for modern boards will find the quantity useful for multiple systems.

20-pin female to 24-pin male conversion

The single specification that determines compatibility is the connector gender change: a 20-pin female end plugs into the power supply while a 24-pin male end seats into the motherboard. No voltage regulation or signal conversion occurs; the adapter simply routes the existing lines to the larger socket. Verify that your supply and board both follow standard ATX pinouts before connecting.

Sustained load behaviour

Under continuous operation the 18AWG conductors carry the same current as the supply cables they extend, so thermal performance matches the host wiring. The short 14-centimetre length minimises voltage drop across the adapter itself. No active cooling is required and the moulded shells remain secure during prolonged use.

Highlights

  • Converts 20-pin PSU to 24-pin motherboard
  • 14 cm length fits tight chassis spaces
  • 18 AWG wire handles standard power loads
  • White plastic shells protect connector pins
  • Five cables included for multiple builds

Specifications

No published specifications for this item yet.

Questions about this item

What does the 14 cm length mean once the cable is routed inside a case?

The 14 cm span connects a 20-pin PSU plug to a 24-pin motherboard socket with minimal slack, suited to compact builds where longer cables would obstruct airflow.

How does the 20-pin to 24-pin interface limit power delivery in practice?

The adapter passes only the 20 conductors from the PSU; the four extra pins on the motherboard side remain unpowered, so the board must operate within the original 20-pin ATX specification.

What clearance does the 18 AWG wire and connector shell need to fit?

The 18 AWG conductors and white plastic shells occupy a standard ATX connector footprint, requiring only the normal 24-pin header space behind the motherboard tray.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.