We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black 20+4 pin dual PSU cables 20cm 18AWG

Vszerda

Vszerda 20+4 Pin Dual 24P PSU Cable 18AWG 20cm 10 Pcs

SKU CH-B6GB-7N6WX

A 20 cm, 18 AWG cable that splits one 24-pin PSU connector into two for dual-motherboard mining rigs, pack of 10

  • Connects one PSU to two motherboards using dual 24-pin connectors
  • 18AWG wire handles high current for mining and dual-power setups
  • 20 cm length keeps cable routing tidy inside the case
  • Pack of 10 cables supports multi-rig builds
  • Black environmental-protection plastic shells resist heat and wear

20+4 Pin Dual PSU Cable Kit

This pack contains ten 20 cm cables built with 18 AWG conductors and black environmental-protection connectors. Each cable splits a single 24-pin ATX output into two 20+4 pin headers so one power supply can feed two motherboards. The set is aimed at mining rigs and dual-system test benches that need extra ATX connections without buying additional PSUs.

18 AWG Wire and Short 20 cm Reach

The 18 AWG gauge handles the current required for dual-motherboard start-up, while the 20 cm length keeps voltage drop low inside a tight chassis. Connectors use a black plastic shell that resists heat and the keyed 20+4 design prevents accidental reverse insertion. Installers must align the notch carefully and avoid forcing the pins to protect both the cable and the motherboard socket.

Single PSU Current Limit and 50 cm Auxiliary Lead

All power still comes from one PSU, so the combined draw of both boards must stay within that unit’s rated output. The auxiliary extension stretches to 50 cm for routing flexibility, yet the total daisy-chain length adds resistance that can affect stability under heavy load. Builders needing independent power regulation or higher total wattage should use separate power supplies instead.

Highlights

  • Connects one PSU to two motherboards using dual 24-pin connectors
  • 18AWG wire handles high current for mining and dual-power setups
  • 20 cm length keeps cable routing tidy inside the case
  • Pack of 10 cables supports multi-rig builds
  • Black environmental-protection plastic shells resist heat and wear

Specifications

No published specifications for this item yet.

Questions about this item

What ATX connector does the 20+4 pin dual cable use and how many motherboards can it power?

Each cable has one 24-pin male plug and two 24-pin female sockets, letting a single PSU feed two motherboards at once.

What length and wire gauge are supplied, and will they reach in a standard case?

The leads are 20 cm long and built with 18 AWG conductors, sized for short runs between adjacent boards in mining frames.

How do I orient the plugs during installation to avoid damaging pins?

Match the keyed notch on each 24-pin connector before pushing straight in; forcing a reversed plug bends or breaks the socket pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.