We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two blue USB 3.0 19-pin right-angle adapters in a clear bag

Vszerda

Vszerda 2 Pack USB 3.0 19/20Pin Male-Female 90° Adapter

SKU CH-3HQP-TWNJD

Two angled USB 3.0 header adapters convert 19/20-pin motherboard connectors for tight spaces while supporting 5 Gbps speeds

  • 90° angle fits tight motherboard headers for cleaner cable routing
  • USB 3.0 5Gbps speed keeps front-panel ports at full throughput
  • Backward compatible with USB 2.0 480Mbps and USB 1.1 1.5Mbps devices
  • Two-way simultaneous data transfer maintains bandwidth in both directions
  • Two-pack covers both 19-pin and 20-pin header variants

USB 3.0 Front Panel Adapter

The Vszerda 2 Pack provides two 19/20-pin male-to-female adapters with a 90-degree angled design. They are intended for PC builders who need to reroute front-panel USB headers on a motherboard where clearance is tight. Each adapter redirects the header sideways, helping to organise internal cabling without forcing sharp bends in the ribbon cable. The pack suits anyone assembling or upgrading a system with restricted space around the front-panel connector.

USB 3.0 5Gbps Throughput

The adapters comply with USB 3.0 Super-Speed at 5Gbps, USB 2.0 Hi-Speed at 480Mbps and USB 1.1 Low-Speed at 1.5Mbps. They maintain full bandwidth for external drives, docking stations or high-speed peripherals connected to the front panel. Two-way data transmission is supported simultaneously. Performance runs out only when the motherboard header itself is limited to an older USB revision, which the adapter cannot overcome.

Replaces Straight Header Cables

These adapters replace a direct straight-through connection between the motherboard header and the front-panel cable. The upgrade is worth it when the header sits flush against a large graphics card, a bulky CPU cooler or the case sidewall, making a straight plug impossible. They do not add extra ports or change the pinout; they only reorient the existing 19/20-pin link. Builders with ample clearance around the header gain no benefit.

Highlights

  • 90° angle fits tight motherboard headers for cleaner cable routing
  • USB 3.0 5Gbps speed keeps front-panel ports at full throughput
  • Backward compatible with USB 2.0 480Mbps and USB 1.1 1.5Mbps devices
  • Two-way simultaneous data transfer maintains bandwidth in both directions
  • Two-pack covers both 19-pin and 20-pin header variants

Specifications

No published specifications for this item yet.

Questions about this item

Will the 19/20-pin 90° adapter fit alongside my existing USB 2.0 front-panel headers on the same motherboard?

Yes, the 90° angle lets the adapter sit flush against the board so adjacent 19/20-pin USB 2.0 headers remain accessible.

How can I verify the adapter is running at USB 3.0 5 Gbps after I install it?

Connect a USB 3.0 device and check the OS device manager or a benchmark tool — it should report Super-Speed 5 Gbps operation.

Does the 2-pack include any mounting screws or cables, or just the two angled gender-changer adapters?

Only the two 19/20-pin male-to-female 90° adapters are supplied; no screws or extra cables are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.