We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided SATA-to-three-fan splitter cables, 11 inches long

Vszerda

Vszerda 2-pack SATA to 3× fan adapter cable 11" black braided

SKU CH-9GPY-808NJ

Splits one SATA power connector into three 3-pin or 4-pin fan headers, 11 inches long with black braided sleeving

  • TypeSATA
  • ColorBlack
  • Connector Detail15 Pin Sata to 3 X 3 Pin / 4 Pin Pmw
  • Terminal GenderMale-to-Male
  • FeaturesBraided
  • Power three fans from one SATA port with 15-pin male connector
  • Braided black sleeving insulates cables and keeps build tidy
  • 11-inch length helps route and hide wires inside case
  • Works with both 3-pin and 4-pin PWM fan connectors
  • Two adapters included for multi-fan cooling setups

Two SATA-to-three-fan adapters

This pack contains two cables that each convert one 15-pin SATA power connector into three 3-pin or 4-pin fan headers. Builders with limited motherboard fan headers can run multiple chassis fans from a single power-supply lead. The adapters suit any 12 V case fan that uses a standard 3-pin or 4-pin plug.

Three fans per cable at fixed 12 V

Each splitter delivers full 12 V to all three outputs with no speed-control circuitry, so connected fans run at their maximum rated RPM. The arrangement works well for constant-airflow cooling loops or radiator fans that do not need PWM regulation. It cannot throttle fan speed, so noise-sensitive builds should look elsewhere.

11-inch braided cables with all-black connectors

The 27 cm length including connectors helps route wires behind motherboard trays for a clean interior. High-density black sleeving protects the conductors and resists abrasion during installation. Male-to-male terminals plug directly into the power supply and fans without extra adapters.

Highlights

  • Power three fans from one SATA port with 15-pin male connector
  • Braided black sleeving insulates cables and keeps build tidy
  • 11-inch length helps route and hide wires inside case
  • Works with both 3-pin and 4-pin PWM fan connectors
  • Two adapters included for multi-fan cooling setups

Specifications

BrandYSIUENG
ModelRM
TypeSATA
ColorBlack
Connector Detail15 Pin Sata to 3 X 3 Pin / 4 Pin Pmw
Terminal GenderMale-to-Male
FeaturesBraided

Questions about this item

Can the 15-pin SATA connector power three 12 V fans on an older PSU that only has SATA power leads?

Yes, each adapter takes one 15-pin SATA plug from the PSU and splits it to three 3-pin or 4-pin fan connectors, delivering 12 V to all three fans.

How do I confirm the fans are running at full speed once the adapter is connected?

The adapter has no speed-control circuitry, so fans run at 12 V constantly; check fan RPM in BIOS or monitoring software to verify they are spinning at their rated maximum.

What comes in the pack and do I need any extra cables to use it?

The box contains two braided 11-inch Y-splitter cables, each with a 15-pin SATA male plug and three 3/4-pin male fan plugs; no additional cables are required if your PSU has spare SATA power connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.