We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 2-Pack Mini-SAS SFF-8087 to 4 SATA 90° Cable 0.5m

SKU CH-AKVZ-KFDE7

A 2-pack of 0.5 m Mini-SAS SFF-8087 to four 90-degree SATA breakout cables for connecting a SAS controller to four drives at 6 Gb/s each

  • TypeMini-SAS Cables
  • ColorBlack/Blue
  • Length1.6
  • Speed6 gigabytes_per_second
  • ConductorCopper
  • FeaturesSFF-8087 to 4x SATA 90 Degree
  • Connect four drives from one controller
  • SFF-8087 host to four SATA targets
  • 90-degree right-angle plugs ease tight routing
  • 6 Gbps per drive data transfer rate
  • 30 AWG braided cables simplify cable management

What this cable set connects

This two-pack provides Mini-SAS SFF-8087 male to four SATA 7-pin female right-angle breakout cables. Each 0.5 m assembly links a SAS HBA or RAID controller to up to four SATA hard drives or SSDs, supporting 6 Gbps per drive for storage expansion in servers or workstations.

Who should use these and who should not

Builders adding SATA drives to a Mini-SAS 36-pin host port will find the labelled, 90-degree connectors simplify routing in tight chassis. Buyers whose backplane presents a Mini-SAS target connector cannot use this host-to-target cable; they need a reverse breakout instead.

Capacity and headroom

Four SATA targets per cable run at up to 6 Gbps each, so a single pair handles eight drives with aggregate bandwidth limited by the controller. The 30 AWG conductors and braided sleeving keep the 0.5 m length flexible, but longer runs or 12 Gbps SAS drives will require a different cable specification.

Highlights

  • Connect four drives from one controller
  • SFF-8087 host to four SATA targets
  • 90-degree right-angle plugs ease tight routing
  • 6 Gbps per drive data transfer rate
  • 30 AWG braided cables simplify cable management

Specifications

BrandADCAUDX
ModelDC-0036
TypeMini-SAS Cables
ColorBlack/Blue
Length1.6
Speed6 gigabytes_per_second
ConductorCopper
FeaturesSFF-8087 to 4x SATA 90 Degree

Questions about this item

What controller interface is required on my motherboard or HBA to use the SFF-8087 male connector?

The host side uses a 36-pin SFF-8087 male connector that plugs into a SAS HBA, RAID controller or motherboard Mini-SAS port.

Will the 90-degree SATA plugs work with drives mounted in a standard backplane?

The right-angle SATA connectors are designed for forward breakout to drives or backplanes; the cable is labelled for easier routing.

How can I verify each drive is running at the rated 6 Gb/s link speed after installation?

Check the negotiated link speed in your controller BIOS or OS disk utility; each SATA target should report 6 Gb/s.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.