We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small beige fibre adapters with blue LC male and SC female connectors

Vszerda

Vszerda 2-Pack LC/UPC Male to SC/UPC Female Simplex Adapter

SKU CH-44QT-AZYK6

Connects LC and SC single-mode fibre patch cables with 0.2 dB insertion loss and 50 dB return loss at 1310 nm and 1550 nm

  • TypeFiber Optic
  • Connector NumberNo Plug
  • Low insertion loss of 0.2 dB at 1310 nm and 1550 nm
  • High return loss of 50 dB ensures clean signal reflection
  • Ceramic and metal sleeve rated for 1000 mating cycles
  • Operating temperature range from -40 °C to +95 °C
  • Connects LC patch cables to SC equipment and visual fault locators

LC/UPC Male to SC/UPC Female Adapter

This two-pack provides single-mode LC/UPC male to SC/UPC female hybrid connectors for joining dissimilar fiber patch cables. Each simplex coupler suits technicians who need quick interface conversion during testing or network maintenance.

Fits Into Build

The ceramic-and-metal sleeve operates from -40 °C to 95 °C and withstands over 1000 mating cycles, freeing installers from frequent replacement in demanding environments. Insertion loss of .2 dB at 1310 nm and 1550 nm keeps signal degradation low across standard single-mode wavelengths.

Bundled Accessories

Two identical adapters let users equip both ends of a test link or maintain a spare without ordering separate units. They enable direct connection to visual fault locators and optical power meters for continuity checks on 9/125 µm fiber.

Highlights

  • Low insertion loss of 0.2 dB at 1310 nm and 1550 nm
  • High return loss of 50 dB ensures clean signal reflection
  • Ceramic and metal sleeve rated for 1000 mating cycles
  • Operating temperature range from -40 °C to +95 °C
  • Connects LC patch cables to SC equipment and visual fault locators

Specifications

BrandPoyiccot
TypeFiber Optic
Connector NumberNo Plug

Questions about this item

What insertion loss can I expect at 1310 nm and 1550 nm with these adapters?

Insertion loss is 0.2 dB at both 1310 nm and 1550 nm wavelengths.

How hot can the operating environment get before the ceramic-metal sleeves risk failure?

The adapters are rated for continuous operation up to 95 °C.

Which patch-cable connectors must I already have to use this LC/UPC male to SC/UPC female hybrid?

You need an LC/UPC patch cable on one side and an SC/UPC patch cable on the other.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.