We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two metallic 6-pin ATX power adapters with 180-degree angled connectors

Vszerda

Vszerda 2 Pack ATX 6Pin 180 Degree Angled Power Connector Adapter internal power cable

SKU CH-4ZHA-HE0HS

Two angled ATX 6-pin adapters reroute GPU power cables horizontally for low-clearance cases

  • Connector Number2
  • Solves GPU clearance in low-profile cases with 180-degree angled 6-pin adapter
  • Two adapters included for dual-cable graphics card power connections
  • Changes cable routing from vertical to horizontal for tighter builds
  • Metallic finish connectors ensure durable contact for desktop graphics cards
  • Compact 4.49 x 2.01 x 0.87 inch size fits cramped chassis interiors

Angled ATX 6-pin adapter for tight builds

This two-pack supplies 180-degree angled connectors that turn a vertical ATX 6-pin cable into a horizontal run. Each adapter mates a 6-pin female socket to a 6-pin male plug, letting the power lead exit the graphics card parallel to the motherboard instead of straight up. The pair is intended for desktop systems where clearance above the GPU is restricted.

Metallic finish and compact footprint

The adapters have a metallic finish and measure 4.49 by 2.01 by .87 inches, weighing 1.76 ounces for the set. Their low profile lets them sit close to the card bracket, reducing strain on the GPU power socket and keeping cables from pressing against a side panel. No extra mounting hardware is required; the connectors lock in place like a standard ATX plug.

Replaces straight 6-pin plugs in height-limited

Builders who cannot fit a conventional straight 6-pin cable because the chassis roof or a drive cage sits too close to the graphics card will gain the needed clearance. The upgrade is worthwhile when the existing cable forces a sharp bend or prevents the side panel from closing. Systems with ample vertical room above the GPU do not need these adapters.

Highlights

  • Solves GPU clearance in low-profile cases with 180-degree angled 6-pin adapter
  • Two adapters included for dual-cable graphics card power connections
  • Changes cable routing from vertical to horizontal for tighter builds
  • Metallic finish connectors ensure durable contact for desktop graphics cards
  • Compact 4.49 x 2.01 x 0.87 inch size fits cramped chassis interiors

Specifications

Brandchenyang
ModelCY-PW-008
Connector Number2

Questions about this item

What does the 180-degree angle on this ATX 6-pin adapter change in practice?

It redirects the cable from a vertical to a horizontal path, letting the connector sit flat against the graphics card instead of sticking straight up.

How much clearance above the graphics card does this adapter need to fit?

The adapter body measures 4.49 by 2.01 by 0.87 inches, so allow roughly 0.87 inches of height above the GPU power socket.

How do I install these adapters and what is the common mistake?

Plug the male end into the graphics card first, then attach your PSU cable to the female end; the error is forcing the PSU cable on before the adapter is seated.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.