Vszerda
Vszerda 2-pack 90 degree left angled VGA 15-pin male to female adapter
Two 90-degree left-angled VGA 15-pin male-to-female adapters fit tight spaces behind monitors and projectors
- TypeLeft Angled
- Length2 inches
- Connector Number2
- Connector Detail0001
- Specifications0001, 2, inches, copper, Projector, Monitor
- Conductorcopper
- 90-degree left angle fits tight spaces behind displays
- 15-pin high-density D-Sub male-to-female connector
- Copper conductors maintain signal quality
- Thumb screws secure a firm connection
- Two adapters included for multiple devices
Compact 90-degree VGA adapter for tight spaces
This two-pack of left-angled VGA adapters connects a standard 15-pin VGA cable to monitors, projectors or TVs where rear clearance is limited. Each adapter measures two inches and uses copper conductors with thumb screws for a secure fit. The vertical left-angle design routes the cable flat against the device.
Replaces straight VGA plugs that block adjacent
Straight connectors often protrude too far, making them unsuitable for wall-mounted displays or crowded AV racks. The 90-degree left angle solves this by turning the cable downward or sideways, freeing space for other connections. The upgrade is worth it whenever a straight plug cannot be fully seated or stresses the port.
Suits installers and home users with recessed VGA
Ideal for anyone connecting legacy video sources to flat-panel displays, projectors or rear-projection TVs where the VGA socket faces a wall or sits in a narrow recess. Not for buyers who need right-angled or upward-facing adapters, or who require longer cable runs beyond the two-inch adapter length.
Highlights
- 90-degree left angle fits tight spaces behind displays
- 15-pin high-density D-Sub male-to-female connector
- Copper conductors maintain signal quality
- Thumb screws secure a firm connection
- Two adapters included for multiple devices
Specifications
| Brand | Toptekits |
|---|---|
| Type | Left Angled |
| Length | 2 inches |
| Connector Number | 2 |
| Connector Detail | 0001 |
| Specifications | 0001, 2, inches, copper, Projector, Monitor |
| Conductor | copper |
| Construction | copper |
| Features | Projector, Monitor, 2, inches, copper, Left Angled |
Questions about this item
How much clearance does the 90 degree left angled VGA adapter need behind the monitor?
The adapter body is 2 inches long and bends 90 degrees to the left, so allow roughly that depth plus the VGA cable thickness behind the port.
Do the thumbscrews on the 15 pin male connector tighten by hand or need a tool?
The supplied thumbscrews are designed for finger tightening; no screwdriver is required to secure the male end to the monitor or projector port.
When should I replace the copper conductor adapters?
Replace them if the 15 pin contacts become bent, corroded or if the left angled housing cracks, causing intermittent video signal.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



