We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black SATA power Y-splitter cables 20cm male to dual female

Vszerda

Vszerda 2-Pack 15-Pin SATA Power Y Splitter Cable 20cm

SKU CH-VFZC-M06HQ

Splits one 15-pin SATA power connector into two using 18AWG copper conductors and a 20cm length

  • TypeSATA
  • ColorBlack
  • Terminal GenderMale-to-Female
  • Speed5 gigabits_per_second
  • ConductorCopper
  • Converts one SATA power port into two for extra drives
  • 18AWG copper conductors deliver stable 3.3V, 5V and 12V power
  • 20cm length aids tidy routing inside compact cases
  • Plug-and-play design needs no drivers or PSU upgrade
  • Two-pack provides a spare cable for future upgrades

Splitter Cable for SATA Power

The Vszerda 2-pack supplies two Y-splitter cables that turn one 15-pin SATA power connector into two. Each 20 cm harness uses 18 AWG copper conductors and black PVC sheathing to deliver 3.3 V, 5 V and 12 V to drives without signal loss. The plug-and-play design requires no drivers and suits SSD, HDD or optical-drive installations.

Check Your Power Supply Connectors

Verify that your PSU has a free 15-pin SATA power lead before ordering. The male plug on each splitter inserts into that lead, so an available connector is essential. Confirm the drives you intend to power use standard 15-pin SATA power inputs; proprietary or slimline variants will not mate with the female ends.

Two Cables for Clean Routing

The 7.87-inch length (excluding connectors) lets you reach adjacent drive bays while keeping slack minimal for tidy cable management. Dual female heads free a single PSU port to run a pair of drives, avoiding a PSU upgrade when expanding storage. The pack includes a spare splitter for future additions or a second system.

Highlights

  • Converts one SATA power port into two for extra drives
  • 18AWG copper conductors deliver stable 3.3V, 5V and 12V power
  • 20cm length aids tidy routing inside compact cases
  • Plug-and-play design needs no drivers or PSU upgrade
  • Two-pack provides a spare cable for future upgrades

Specifications

BrandOHKIKOME
Model1 to 2
TypeSATA
ColorBlack
Terminal GenderMale-to-Female
Speed5 gigabits_per_second
ConductorCopper

Questions about this item

What comes in the pack and do I need any extra cables?

The pack contains two 20 cm SATA power Y-splitter cables. Each has one 15-pin male plug and two 15-pin female sockets. No extra cables or drivers are required.

Should I choose the single cable or the 2-pack for my build?

The listing is only sold as a 2-pack, giving you two identical splitters. Use both if you have several drives, or keep one as a spare.

Will the 5 Gb/s rating still hold when I connect two SSDs to one splitter?

The 5 Gb/s figure refers to the SATA data interface speed. This splitter only distributes 3.3 V, 5 V and 12 V power, so it does not affect data transfer rates.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.