We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two packs of black 1-to-5 3-pin RGB splitter cables with male-to-male adapters

Vszerda

Vszerda 2 Pack 1-to-5 3 Pin Addressable RGB Splitter Y Cable internal power cable

SKU CH-RKEW-480C1

Two addressable RGB splitter cables turn one 5 V 3-pin motherboard header into five connections for fans or strips, with a 1 ft female-to-female lead and a male-to-male pin adapter included

  • Connect five addressable RGB devices from one motherboard header
  • 5 V 3-pin addressable RGB only, not for 12 V systems
  • 1 ft female-to-female cable with male-to-male pin adapter included
  • Two splitter cables in each pack for multiple builds
  • Motherboard RGB header typically supplies 5 V / 3 A, 15 W maximum

Splitter for 5V 3-pin ARGB headers

This pack contains two 1-to-5 addressable RGB splitter cables that turn a single motherboard 5V 3-pin header into five connectors. Each splitter includes a 1 ft female-to-female lead and a male-to-male gender changer pin. The cables are designed only for 5V addressable RGB devices and will not work with 12V 4-pin RGB systems.

Passive cable with no added power draw

The splitters draw no external power and rely entirely on the motherboard header, which typically supplies up to 15W at 5V. Keep total attached LED strip or fan cable runs under 3.3 ft to minimise voltage drop. If connected devices appear dim, the header is overloaded and you should reduce the number of attached items.

Synchronised control across five channels

All five outputs on each splitter are driven in parallel, so fans and lighting strips connected to the same cable display identical effects simultaneously. The passive design adds no active components that could fail under sustained use, but total current must stay within the motherboard header limit to avoid dimming or instability over long periods.

Highlights

  • Connect five addressable RGB devices from one motherboard header
  • 5 V 3-pin addressable RGB only, not for 12 V systems
  • 1 ft female-to-female cable with male-to-male pin adapter included
  • Two splitter cables in each pack for multiple builds
  • Motherboard RGB header typically supplies 5 V / 3 A, 15 W maximum

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda 1-to-5 3-pin ARGB splitter and which step is most often done wrong?

Connect the 1 ft female-to-female lead to the motherboard 5 V 3-pin header, attach up to five devices to the splitter, and use the included male-to-male gender changer only if a device has a male plug; the step most often missed is aligning the arrow on every connector with the 5 V pin on the board.

What maintenance or replacement will the Vszerda ARGB splitter need later?

No scheduled maintenance is required; inspect the cables periodically for damaged insulation or bent pins and replace the splitter only if a connector becomes loose or the wiring is physically compromised.

What limit appears first when the Vszerda ARGB splitter runs under sustained load?

The motherboard 5 V header typically supplies up to 15 W total; if connected LED strips or fans exceed that budget the lighting will dim, signalling the header’s current limit has been reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.