We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short Mini SAS cables with SFF-8643 and SFF-8087 connectors, black finish

Vszerda

Vszerda 2× Mini SAS SFF-8643 to SFF-8087 36Pin 0.5m 12Gbps

SKU CH-XJZG-V55CM

Connects 12 Gbps Mini SAS HD SFF-8643 ports to legacy SFF-8087 36-pin controllers with twin-axial 30 AWG cable

  • TypeMini SAS
  • ColorSFF-8643 to SFF-8087
  • Connector DetailSff-8643 to Sff-8087
  • Terminal GenderMale-to-Male
  • Speed12 gigabits_per_second
  • SpecificationsMini SAS
  • 12 Gbps data rate for high-speed storage links
  • SFF-8643 to SFF-8087 connects modern and legacy SAS gear
  • Twin-axial construction keeps signal integrity at 12 Gbps
  • 5 m length suits tight server chassis routing
  • Two cables included for dual-port or redundant configurations

Connection Bridge

This Vszerda cable pair connects Mini SAS HD SFF-8643 ports to legacy Mini SAS SFF-8087 (36Pin) connectors inside servers and storage arrays. Each 0.5 metre assembly carries a 12 Gbps signal rating compatible with SAS 2.1 and SAS 3.0 specifications. Builders use the twin-axial construction to link modern HBA or RAID controllers to older backplanes or direct-attached storage enclosures. The male-to-male gender suits internal chassis routing.

Build Integration

The 1.6 foot length keeps cable management tidy in dense 1U or 2U chassis without leaving slack that blocks airflow. AWG 30 conductors fit tight routing channels around drive cages and power supplies where thicker loom would not bend. No external power or active electronics are required; the passive assembly simply bridges the two connector standards. Two cables in the pack support dual-port controllers or redundant paths.

Thermals Noise Power

Passive copper construction adds no fan noise and draws no power beyond the signal current supplied by the controller. The shielding protects 12 Gbps data integrity in electrically noisy server environments. Heat contribution inside the chassis is negligible compared to drives and controllers. The cables operate within standard SAS temperature ranges without active cooling.

Highlights

  • 12 Gbps data rate for high-speed storage links
  • SFF-8643 to SFF-8087 connects modern and legacy SAS gear
  • Twin-axial construction keeps signal integrity at 12 Gbps
  • 5 m length suits tight server chassis routing
  • Two cables included for dual-port or redundant configurations

Specifications

BrandHeretom
TypeMini SAS
ColorSFF-8643 to SFF-8087
Connector DetailSff-8643 to Sff-8087
Terminal GenderMale-to-Male
Speed12 gigabits_per_second
SpecificationsMini SAS
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

Will the 0.5 m length reach between adjacent drive bays in a 2U server chassis?

The cable is 0.5 m (1.6 ft) long, which typically spans adjacent bays in a 2U chassis, but measure your exact routing path before ordering.

Does the AWG 30 twin-axial construction stay cool when running 12 Gbps SAS traffic continuously?

AWG 30 twin-axial cable is designed for 12 Gbps operation; passive copper generates minimal heat, so sustained transfers do not raise cable temperature noticeably.

Which host adapters have the SFF-8643 ports this cable plugs into?

The SFF-8643 end connects to SAS 2.1 or SAS 3.0 HBAs and RAID controllers that expose Mini SAS HD ports; the SFF-8087 end mates with legacy 36-pin backplanes or expanders.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.