We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular PMMA case hub with magnetic standoffs and multiple fan and ARGB ports

Vszerda

Vszerda 2-in-1 PWM ARGB Controller Hub 8 Ports PMMA Case Magnetic Standoff 12V 5V IR Remote

SKU CH-RR14-HX3KT

An ARGB and PWM hub managing eight 5 V addressable RGB strips and eight 12 V 4-pin fans, with IR remote fallback and magnetic PMMA mounting

  • Controls 8 PWM fans and 8 ARGB devices from one hub
  • Syncs up to 8 ARGB strips via motherboard 5 V header
  • IR remote manages lighting when motherboard lacks ARGB support
  • Magnetic standoffs secure hub inside chassis without tools
  • PMMA case shields circuitry while keeping layout visible

2-in-1 PWM ARGB Hub

This Vszerda controller hub combines eight 12 V PWM fan headers and eight 5 V ARGB connectors in a single unit. A magnetic standoff and PMMA case let you secure the board inside the chassis without tools. It is designed for builders who want centralised fan and lighting management.

Suits 5 V ARGB ecosystems only

The hub synchronises up to eight addressable RGB devices through a motherboard header or the supplied IR remote when the board lacks ARGB control. It does not support 12 V RGB components, so owners of older four-pin RGB strips must look elsewhere.

Eight fans and eight light strips

Each PWM channel delivers 12 V power to a 4-pin fan while the ARGB side drives 5 V addressable LEDs. The included 1.3 ft motherboard cables connect the hub to PWM and ARGB headers. Headroom ends at eight devices per type; larger loops need a second hub.

Highlights

  • Controls 8 PWM fans and 8 ARGB devices from one hub
  • Syncs up to 8 ARGB strips via motherboard 5 V header
  • IR remote manages lighting when motherboard lacks ARGB support
  • Magnetic standoffs secure hub inside chassis without tools
  • PMMA case shields circuitry while keeping layout visible

Specifications

No published specifications for this item yet.

Questions about this item

Does the hub need a free 12 V 4-pin PWM header on the motherboard to power its eight fan ports?

Yes, the hub draws fan power through a 12 V 4-pin PWM connection to the motherboard, so one such header must be available.

Can I keep my existing 12 V RGB strips and control them through the hub's IR remote?

No, the hub only supports 5 V AURA addressable RGB devices; 12 V RGB components will not work.

How do I confirm the hub is correctly reporting fan speeds to the motherboard after installation?

Connect the included 1.3 FT PWM feedback cable to a motherboard fan header, then check that each attached fan shows an RPM reading in BIOS or monitoring software.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.