We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 2-in-1 IDE to SATA adapter 3.5 inch 40pin converter

Vszerda

Vszerda 2 in 1 IDE to SATA / SATA to IDE Adapter 3.5" 40pin

SKU CH-NR97-2RBR7

Converts 3.5" 40-pin IDE drives to SATA and vice versa for bidirectional data transfer

  • Connect IDE and SATA drives with one bidirectional adapter
  • Supports 3.5 inch 40-pin IDE hard drives and optical drives
  • Enables data transfer between legacy IDE and modern SATA interfaces
  • Compact converter works with DVD, CD and HDD devices

2-in-1 IDE / SATA adapter for 3.5" drives

This bidirectional converter connects a 40-pin IDE device to a SATA host or a SATA drive to an IDE controller. It supports 3.5-inch hard disks and optical drives such as DVD or CD units. The adapter handles the signal translation without requiring an external power brick for the conversion logic itself.

Upgrades legacy IDE-to-SATA connectivity

Replaces single-direction dongles that only work one way, letting you move data between older and newer interfaces in either direction. The jump is worth it when you need to access an IDE drive on a modern SATA motherboard or run a SATA drive on an older IDE-only system. Not for 2.5-inch laptop drives without a separate mechanical bracket or for installations that demand hot-plug capability.

Highlights

  • Connect IDE and SATA drives with one bidirectional adapter
  • Supports 3.5 inch 40-pin IDE hard drives and optical drives
  • Enables data transfer between legacy IDE and modern SATA interfaces
  • Compact converter works with DVD, CD and HDD devices

Specifications

No published specifications for this item yet.

Questions about this item

What width drive bay does the 3.5" adapter fit?

The adapter is built for a standard 3.5 inch drive bay and uses a 40-pin IDE connector for the legacy side.

How do I connect the SATA side and what step is often missed?

Plug the SATA data cable into the adapter's SATA port and ensure the SATA power cable is also attached, as the IDE side needs separate power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.