We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda 2.5Gbps USB 3.0 Type-A to RJ45 network adapter

Vszerda

Vszerda 2.5Gbps USB 3.0 to RJ45 network ethernet cable adapter

SKU CH-ZGZS-S63CT

A USB 3.0 to RJ45 adapter delivering 2.5 Gbps Ethernet with auto-negotiation down to 10 Mbps and support for Windows 11, 10 and Linux

  • CatLaptop & Desktop & Networking
  • 5Gbps speed for faster file transfers and smooth streaming
  • USB 3.0 Type-A plug fits desktops and servers directly
  • Works with Windows 10, Windows 11 and Linux systems
  • Auto-negotiates 2.5G, 1G, 100M and 10M on Cat5e up to 100m
  • VLAN tagging, PXE boot and full-duplex flow control supported

2.5Gbps USB 3.0 Ethernet Adapter

This USB 3.0 Type-A to RJ45 adapter adds a 2.5Gbps wired network port to desktops, laptops, servers, workstations and NAS devices. It supports Windows 11, Windows 10 and Linux operating systems. The adapter connects via a standard USB 3.0 slot and works with USB-C ports when an OTG adapter is used. It is designed for users who need faster wired connectivity than a standard gigabit port provides.

USB 3.0 Bandwidth and Cable Limits

The USB 3.0 interface caps practical throughput below the nominal 2.5Gbps PHY rate, so sustained speeds will be lower than the link speed. The RJ45 port auto-negotiates down to 1Gbps, 100M or 10M and supports standard Cat5e or higher UTP cables at distances up to 100m. Full-duplex flow control and VLAN tagging are supported, but the USB bus remains the bottleneck for heavy multi-gigabit workloads.

2.5GBASE-T Compatibility Decides Fit

This adapter implements IEEE 802.3bz 2.5GBASE-T, so it requires a switch or router port that also supports 2.5GBASE-T to reach the rated speed; a 1Gbps-only switch will limit the link to 1000Mbps. Buyers whose infrastructure runs only at 1Gbps will not gain the 2.5Gbps advantage and should consider whether the higher-spec link is needed.

Highlights

  • 5Gbps speed for faster file transfers and smooth streaming
  • USB 3.0 Type-A plug fits desktops and servers directly
  • Works with Windows 10, Windows 11 and Linux systems
  • Auto-negotiates 2.5G, 1G, 100M and 10M on Cat5e up to 100m
  • VLAN tagging, PXE boot and full-duplex flow control supported

Specifications

BrandNGFF
CatLaptop & Desktop & Networking

Questions about this item

Should I pick the 2.5Gbps or the 1Gbps mode for my network?

The adapter auto-negotiates at 2.5Gbps, 1Gbps, 100M or 10M, so it will select the highest speed your switch and cabling support.

What real-world throughput can I expect over the USB 3.0 link?

USB 3.0 caps at 5Gbps signalling, so the 2.5Gbps Ethernet rate fits with headroom for protocol overhead.

Does the RJ45 port require Cat6 or will Cat5e work at 2.5GBASE-T?

The spec states standard Cat5e or above UTP up to 100m for 2.5Gbps operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.