We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 2.5 inch SAS drive tray caddy with four mounting screws

Vszerda

Vszerda 2.5" SAS hard drive tray caddy 500223-1 PACK

SKU CH-FQ7P-4944E

Mounts a 2.5" SAS drive in HP ProLiant DL, ML and BL servers plus StorageWorks arrays

  • ColorBlack
  • Dimensions16.0 in x 9.0 in x 2.5 in
  • Weight0.059 kilograms
  • SAS interface enables direct server backplane connection
  • Fits 2.5 inch drives in HP ProLiant DL and ML servers
  • Supports Integrity BL and StorageWorks arrays
  • Metal construction with included mounting screws
  • Compact 6.3 x 3.54 x 0.98 inch form factor

2.5" SAS tray for HP ProLiant

This Vszerda tray caddy fits a single 2.5" SAS hard drive into the drive bays of HP ProLiant DL, ML and BL servers from the G5, G6 and G7 families. It also matches the sled format used in HP Integrity blades and StorageWorks arrays. The metal frame ships with four mounting screws for immediate installation.

Capacity and headroom

The caddy accepts one 2.5" drive and presents a standard SAS connector to the backplane. It adds no controller or expander, so total storage is limited to the single device installed. Builders needing multiple drives must populate additional bays with separate caddies.

Thermals, noise and power

The tray has no active cooling or electronics of its own; it relies entirely on the server chassis airflow. In normal operation it contributes no audible noise and draws no power beyond the drive itself. The metal construction conducts heat from the drive into the chassis cooling path.

Highlights

  • SAS interface enables direct server backplane connection
  • Fits 2.5 inch drives in HP ProLiant DL and ML servers
  • Supports Integrity BL and StorageWorks arrays
  • Metal construction with included mounting screws
  • Compact 6.3 x 3.54 x 0.98 inch form factor

Specifications

BrandHeretom
ColorBlack
Dimensions16.0 in x 9.0 in x 2.5 in
Weight0.059 kilograms

Questions about this item

Will this tray fit the HP ProLiant DL380 G6 I already have?

Yes, the caddy is listed for the DL380 G6 and uses the SAS interface those servers expect.

How can I confirm the tray is seated correctly once installed?

The drive should click into the backplane and the server's drive LED will show activity when the system powers on.

Does the package include the four mounting screws I need?

The box contains the tray and four screws, so no extra hardware is required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.