We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal box with one HDMI input and two HDMI outputs

Vszerda

Vszerda 1x2 HDMI Splitter 4K@30Hz 10.2 Gbps

SKU CH-JECQ-VPB5D

Splits one HDMI source to two identical displays at up to 4K@30Hz with 10.2 Gbps bandwidth and HDCP 1.4 support

  • Splits one HDMI source to two identical displays
  • Supports 4K at 30 Hz and 1080p at 60 Hz
  • Transmits up to 110 ft total cable distance
  • Compatible with HDMI 1.4 and HDCP 1.4
  • Handles LPCM, Dolby TrueHD and DTS-HD master audio

What this splitter does

The Vszerda 1x2 HDMI splitter takes a single HDMI source and duplicates it to two displays at the same time. It supports video resolutions up to 4K at 30 Hz and 1080p at 60 Hz with a bandwidth of 10.2 Gbps. Audio formats including LPCM, Dolby-AC3, DTS 7.1 and Dolby TrueHD pass through without loss. The metal housing helps dissipate heat during continuous operation.

Check your source and cables first

Your source device must output HDMI 1.4 or earlier; the splitter cannot work with HDMI 2.0 or 2.1 signals. Both connected displays will show an identical mirrored image because the unit does not support extended desktop modes. Use standard AWG26 HDMI cables and keep the input run under 40 ft and each output run under 60 ft for reliable transmission up to 100 ft total.

Thermals noise and power in daily use

The all-metal enclosure acts as a passive heatsink so the splitter runs silently with no fan noise. Power consumption is low enough that the unit draws what it needs from the HDMI source in most setups. Under normal loads the casing stays warm but not hot, making it suitable for enclosed AV cabinets or desktop use without extra ventilation.

Highlights

  • Splits one HDMI source to two identical displays
  • Supports 4K at 30 Hz and 1080p at 60 Hz
  • Transmits up to 110 ft total cable distance
  • Compatible with HDMI 1.4 and HDCP 1.4
  • Handles LPCM, Dolby TrueHD and DTS-HD master audio

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda 1x2 HDMI Splitter include any cables in the box?

The splitter itself has one HDMI input and two HDMI outputs; you must supply three separate HDMI cables — one from the source to the splitter and one from the splitter to each display.

Should I choose this 4K@30Hz 10.2 Gbps model or a different version for 4K@60Hz?

This unit is limited to 4K@30Hz and HDMI 1.4 bandwidth; it explicitly does not support 4K@60Hz or HDMI 2.0/2.1, so pick a different splitter if you need 60 Hz at 4K.

What does the 10.2 Gbps rating mean when I connect a 4K source to two monitors?

The 10.2 Gbps bandwidth carries 4K at 30 Hz to both outputs simultaneously; both screens show an identical mirrored image — no extended desktop is possible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.