We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with HDMI ports on each side

Vszerda

Vszerda 1x2 HDMI 2.1 Splitter 8K 60Hz 4K 120Hz Metal Case

SKU CH-EBG2-KXMG2

Splits one HDMI 2.1 source to two displays at up to 8K 60 Hz or 4K 120 Hz with HDR and VRR support

  • Mirror one source to two displays simultaneously
  • 8K at 60 Hz and 4K at 120 Hz for sharp motion
  • HDCP 2.3 and HDR 10+ pass-through for protected 4K content
  • Metal case dissipates heat and shields the signal
  • Powered design regenerates the signal over long cable runs

1×2 HDMI 2.1 Splitter for 8K Sources

This powered splitter takes one HDMI 2.1 source and duplicates it to two displays simultaneously. It supports 8K at 60 Hz with HDCP 2.3, 4K at 120 Hz in full RGB 4:4:4, and lower resolutions up to 1080p at 240 Hz. The metal case provides shielding and the unit also regenerates the signal at the end of a long cable run.

Upgrade from basic 4K splitters

A standard 4K 60 Hz splitter cannot pass 4K 120 Hz or 8K 60 Hz signals required by modern consoles and high-refresh monitors. This model adds HDMI 2.1 bandwidth, HDCP 2.3 compliance and VRR passthrough so the jump is worthwhile when the source or displays demand those higher refresh rates and colour formats.

Handles dual 8K 60 Hz or 4K 120 Hz outputs

The splitter comfortably drives two identical 8K 60 Hz screens or two 4K 120 Hz displays with HDR10+ and Dolby Vision where supported. It does not extend the desktop — only mirror — and it cannot downscale independently per output, so mixed-resolution setups will run at the lowest common denominator.

Highlights

  • Mirror one source to two displays simultaneously
  • 8K at 60 Hz and 4K at 120 Hz for sharp motion
  • HDCP 2.3 and HDR 10+ pass-through for protected 4K content
  • Metal case dissipates heat and shields the signal
  • Powered design regenerates the signal over long cable runs

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda 1x2 HDMI 2.1 splitter need external power to run?

Yes, it is a powered splitter and includes a power adapter that must be connected for operation.

What is the correct order to connect the source, displays and power so the splitter detects both screens?

Connect the power adapter first, then the HDMI source, and finally the two displays; the unit uses EDID to negotiate 8K 60 Hz or 4K 120 Hz on both outputs.

Will the power supply or HDMI ports need replacement after extended 4K 120 Hz use?

The metal case acts as a heatsink for continuous 8K 60 Hz or 4K 120 Hz operation; no user-serviceable parts are inside, so only the external power adapter would ever need replacing if it fails.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.