We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red sleeved PSU extension cable kit with ATX 24-pin, EPS 8-pin and two PCI-E 8-pin connectors, black plugs, cable combs included

Vszerda

Vszerda 18AWG Sleeved Extension Cable Kit 24P ATX EPS 8P PCI-E 8P Red

SKU CH-RAWG-A0XAZ

A sleeved 18 AWG extension kit with 24-pin ATX, 4+4-pin EPS and two 8-pin PCIe cables, each 300 mm long, pre-bent for a clean 180-degree bend and supplied with combs for tidy routing

  • Clean routing with 18 AWG wires and included cable combs
  • 180° pre-bent design keeps cables neat after sharp bends
  • Heat-shrink-less construction for a sleek uniform look
  • 300 mm length fits standard ATX, EPS and PCI-E layouts
  • Red sleeved extensions compatible with all power supplies

Extension kit for PSU cable management

This Vszerda kit adds sleeved extensions to an existing power supply. It includes one 24-pin ATX cable, one 4+4-pin EPS cable and two 8-pin PCI-E cables. Builders who want a uniform red appearance across motherboard and GPU power runs will find the matching colour useful. The kit is not for systems that require longer reach than the supplied length or non-standard pinouts.

Behaviour under sustained load

Each cable uses 18 AWG conductors rated for continuous current delivery to CPU and graphics card. The 3 mm diameter sleeve protects the wires while allowing a stiff yet adaptable temperament during routing. Pre-bent upper-layer cables remain neat after a 180° bend, reducing strain on connectors during long-term operation. No heat-shrink tubing is used, so insulation relies on the high-density sleeve alone.

Installation and common issues

Cables arrive pre-assembled with male 5557 to female 5559 connectors and two combs per cable for alignment. Length is 300 ± 10 mm, so measure clearance before ordering. Disassembly is discouraged; if DIY adjustment is needed, use proper tools and avoid excessive force. Colour may vary slightly from images due to display differences, and batch changes can alter appearance without notice.

Highlights

  • Clean routing with 18 AWG wires and included cable combs
  • 180° pre-bent design keeps cables neat after sharp bends
  • Heat-shrink-less construction for a sleek uniform look
  • 300 mm length fits standard ATX, EPS and PCI-E layouts
  • Red sleeved extensions compatible with all power supplies

Specifications

No published specifications for this item yet.

Questions about this item

Will these 18AWG extensions add heat or resistance when the system runs all day?

The 18 AWG cores keep resistance low, so the 300 mm extensions do not add measurable heat during continuous operation.

What power supply connectors must I already have to use the 24-pin ATX, 4+4-pin EPS and dual 8-pin PCI-E cables in this kit?

Your PSU needs a standard 24-pin ATX, an 8-pin EPS (4+4) and two 8-pin PCI-E outputs; the extensions plug into those with male 5557 to female 5559 interfaces.

Will the pre-bent 180° design and included combs keep cables tidy alongside older motherboards and graphics cards?

The pre-bent length stagger and two combs per cable hold a neat 180° bend, so the 300 mm sleeved extensions route cleanly around legacy board layouts and large GPU coolers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.