We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green sleeved cable kit with 24-pin ATX, 8-pin EPS and two 8-pin PCIe extensions, black connectors, combs included

Vszerda

Vszerda 18AWG ATX 24P EPS 8P PCI-E 8P Extension Cable Kit Green

SKU CH-MYGY-M5XFJ

Green sleeved extension kit adds 300 mm to ATX 24-pin, EPS 8-pin and two PCI-E 8-pin cables with 18 AWG cores and cable combs

  • 18 AWG cores deliver stable power to motherboard and GPU
  • 300 mm length with 5557 to 5559 connectors fits most full-tower builds
  • Pre-bent 180° layering keeps cables flat and tidy after routing
  • Heat-shrink-free sleeves give a clean uniform look in green
  • Two combs per cable lock wires in place for consistent spacing

Cable Kit Contents

The Vszerda 18AWG extension kit includes a 24-pin ATX cable, a 4+4-pin EPS cable and two 8-pin PCI-E cables, each 300 mm long with black connectors. The high-density flexible sleeve gives a stiff yet adaptable feel while the pre-bent design keeps layers neat after a 180-degree bend. Cable combs are supplied for every cable to maintain uniform spacing.

Installation Experience

Each cable uses a male 5557 to female 5559 interface so it plugs directly between the power supply and the motherboard or graphics card without tools. The heat-shrink-less construction reduces bulk, but the tight sleeve can make routing through narrow grommets difficult. Forcing the pre-bent cables into sharp bends may stress the pins, so plan the path before seating connectors fully.

Compatibility Check

Verify that your power supply uses standard ATX 24-pin, EPS 4+4-pin and PCI-E 8-pin outputs, as the kit follows that default pinout. The 18 AWG core and 3 mm diameter suit typical modular PSU cables, yet proprietary or non-standard pin arrangements will not work. Confirm the 300 mm length reaches your components without tension, and note that actual green shade may vary slightly from product images.

Highlights

  • 18 AWG cores deliver stable power to motherboard and GPU
  • 300 mm length with 5557 to 5559 connectors fits most full-tower builds
  • Pre-bent 180° layering keeps cables flat and tidy after routing
  • Heat-shrink-free sleeves give a clean uniform look in green
  • Two combs per cable lock wires in place for consistent spacing

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the ATX 24-pin extension is seated correctly after routing?

The pre-bent design keeps cables neat after a 180° bend; push each 5559 female connector onto the PSU's 5557 male pins until it clicks and verify the 300 mm length reaches without tension.

What cables and combs are included versus what I must supply?

Kit supplies one 24-pin ATX, one 4+4-pin EPS, two 8-pin PCIe extensions — each with two combs — all 300 mm long; you provide the power supply and motherboard or GPU.

Which connector mix matches a build needing CPU and dual GPU power?

The fixed set gives one EPS 4+4-pin for the CPU and two PCIe 8-pin for graphics, so it covers that configuration in a single kit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.