We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power supply brick with 4-pin and 6-pin output connectors and AC input socket

Vszerda

Vszerda 180W power adapter DPS-180AB-22B for HP ProDesk 280 G2 400 G4 600 G3 SFF

SKU CH-5HQV-CK9C4

180 W replacement PSU with 4+6 pin connector for HP ProDesk 280 G2, 400 G4 and 600 G3 SFF, 100-240 V input

  • 180W output powers HP ProDesk SFF workstations reliably
  • 100–240V AC input works worldwide without a converter
  • 4-pin + 6-pin connector fits the listed HP chassis directly
  • Tested before shipment so it arrives ready to install
  • Replaces HP part numbers 906189-001 906189-003 906189-004 854142-001 854142-003

180W replacement for HP ProDesk SFF

This 180W power adapter replaces the DPS-180AB-22B unit found in HP ProDesk 280 G2, 400 G4 and 600 G3 small-form-factor desktops. It matches part numbers 906189-001, 906189-003, 906189-004, 854142-001 and 854142-003. Each unit is tested before shipment.

4-pin plus 6-pin connector limits

The PSU uses a combined 4-pin and 6-pin connector, so it only fits systems wired for that exact layout. Input range is 100-240V at 50-60Hz with a 2.3A maximum draw. Builders needing a different pin count or higher wattage cannot use this adapter.

180W maximum output decides fit

The single specification that determines compatibility is the 180W maximum output. If the original unit supplied more power or used a different connector keying, this adapter will not meet the requirement. Confirm the original part number before ordering.

Highlights

  • 180W output powers HP ProDesk SFF workstations reliably
  • 100–240V AC input works worldwide without a converter
  • 4-pin + 6-pin connector fits the listed HP chassis directly
  • Tested before shipment so it arrives ready to install
  • Replaces HP part numbers 906189-001 906189-003 906189-004 854142-001 854142-003

Specifications

No published specifications for this item yet.

Questions about this item

Which HP ProDesk SFF models does the 180W DPS-180AB-22B replace?

It fits HP ProDesk 280 G2 SFF, 400 G4 SFF and 600 G3 SFF, matching part numbers 906189-001, 906189-003, 906189-004, 854142-001 and 854142-003.

What does the 180W rating deliver inside the PC?

The unit supplies up to 180W total to the motherboard and components through its 4-pin plus 6-pin connector, supporting the CPU, memory and add-in cards in the listed SFF chassis.

What AC input range does the adapter accept and what connector does it use?

It auto-ranges from 100V to 240V at 50-60Hz drawing 2.3A max, and connects to the PC via a combined 4-pin and 6-pin plug.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.