We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black metal power supply unit with 4+4+7 pin connector visible

Vszerda

Vszerda 180W D16-180P2A Power Supply Replacement for HP Prodesk

SKU CH-RCJR-NZF3T

180 W replacement power supply with 4+4+7 pin connector for compatible HP ProDesk SFF and MT desktops

  • 180 W output powers demanding HP Prodesk SFF and MT systems
  • 100-240 V AC input works on any mains supply worldwide
  • 4-pin, 4-pin and 7-pin connector matches original HP part exactly
  • Replaces nine HP part numbers including L08261-002 and 901771-004
  • Compatible with Prodesk 680, 800 G3, 480, 600 G4, 280, 285 and Pro G3 MT

Replacement 180 W Power Adapter

This Vszerda unit replaces the D16-180P2A power supply used in HP ProDesk 680, 800 G3 SFF, 480, 600 G4 SFF, 280, 285 and Pro G3 MT desktops. It accepts 100-240 V AC input at 50-60 Hz and delivers up to 180 W through a 4-pin, 4-pin and 7-pin connector set. The part matches HP part numbers L08261-002, 901762-002, 901763-001, 901763-002, 901771-003 and 901771-004. Condition is new.

Suits Owners of Listed ProDesk Models

It suits anyone whose original supply has failed or who needs a spare for the exact models and part numbers listed above. Builders working on other HP chassis, different form factors or proprietary pin-outs should look elsewhere because the connector layout and voltage rails are specific to this series. The adapter does not fit tower, micro-tower or small-form-factor units outside the stated compatibility list.

Steady 180 W Output Under Load

Under sustained load the unit maintains its rated 180 W maximum output within the 100-240 V AC input range. The 2.3 A input ceiling and fixed 50-60 Hz frequency mean thermal behaviour is consistent during long work sessions. No higher peak rating or dynamic boost capability is specified, so continuous draw should stay at or below the rated figure.

Highlights

  • 180 W output powers demanding HP Prodesk SFF and MT systems
  • 100-240 V AC input works on any mains supply worldwide
  • 4-pin, 4-pin and 7-pin connector matches original HP part exactly
  • Replaces nine HP part numbers including L08261-002 and 901771-004
  • Compatible with Prodesk 680, 800 G3, 480, 600 G4, 280, 285 and Pro G3 MT

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard power connectors does my HP Prodesk need for the D16-180P2A's 4 pin+4 pin+7pin layout to fit?

The motherboard must provide one 4-pin CPU power socket, one additional 4-pin peripheral socket, and one 7-pin main power socket matching the D16-180P2A connector.

Will the 180W D16-180P2A power a Prodesk 600 G4 SFF that originally used a 901763-001 unit?

Yes, the D16-180P2A replaces part numbers including 901763-001 and 901763-002 for the 600 G4 SFF.

How can I confirm the D16-180P2A is delivering 180W after installation?

The system should boot stably under full load and the PSU label shows AC Input 100-240V~2.3A 50-60Hz with 180W max output.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.