We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red braided SATA cable with 90 and 180 degree connectors

Vszerda

Vszerda 18 inch SATA 3.0 cable 90 to 180 degree red sleeved

SKU CH-VV5B-PW7SB

An 18-inch SATA 3.0 data cable with a 90-to-180-degree angled connector, locking latches, 26AWG tinned copper conductors and a red braided sleeve for 6.0 Gbps transfers

  • Locking latch prevents accidental disconnection during operation
  • 90 to 180 degree angle eases routing in tight cases
  • Red braided nylon jacket protects conductors from abrasion
  • 0 Gbps throughput matches SATA 3.0 specification
  • 26 AWG tinned copper conductors maintain signal integrity

SATA 3.0 cable for tight builds

This 18 inch SATA 3.0 cable connects motherboards or host controllers to internal hard drives and optical drives. The 90 degree to 180 degree connector orientation helps route the cable neatly in cramped chassis. Locking latches on both ends keep the connection secure during transport or vibration. Red sleeved braiding adds durability and a clean look.

Angled connectors ease routing

The right-angle plug inserts into drive ports that face a side panel or a crowded drive cage, while the straight end fits standard motherboard headers. Twenty-six AWG tinned copper conductors carry the signal without needing extra power adapters. The nylon fibre jacket protects the wires from abrasion when threaded through tight grommets. Backwards compatibility lets the cable work with older SATA revisions.

Sustained 6.0 Gbps throughput

Rated for SATA revision 3.0 speeds up to 6.0 Gbps, the cable maintains that bandwidth across its full length during long file transfers or continuous drive activity. UL listing and RoHS compliance confirm the materials meet safety and environmental standards. Actual throughput remains limited by the slowest connected device. The locking mechanism prevents signal drop-outs caused by cable creep over time.

Highlights

  • Locking latch prevents accidental disconnection during operation
  • 90 to 180 degree angle eases routing in tight cases
  • Red braided nylon jacket protects conductors from abrasion
  • 0 Gbps throughput matches SATA 3.0 specification
  • 26 AWG tinned copper conductors maintain signal integrity

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum data rate this 18 inch SATA 3.0 cable can carry?

It supports SATA revision 3.0 up to 6.0 Gbps, though actual throughput depends on the connected drive and controller.

Does the red sleeved jacket affect heat or noise during continuous operation?

The nylon braided sleeve adds durability and flexibility; the cable itself is passive and produces no noise or measurable heat.

Which connectors must my motherboard and drive provide for the 90 to 180 degree ends to fit?

Both ends use standard 7-pin SATA data ports with an L-type key; the 90-degree plug suits tight headers, the 180-degree plug suits straight ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.