We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda 15Pin SATA to 6 Pin PCI-Express Video Card Power Adapter Cable 20cm 2 Pack

SKU CH-5VKS-0HK65

Converts a 15-pin SATA power connector to a 6-pin PCI-Express plug for graphics cards, 20 cm length, pack of two

  • Powers a PCIe video card from a SATA connector
  • 15 pin SATA to 6 pin PCIe adapter included
  • 20 cm cable length keeps routing tidy
  • Reduces strain on motherboard and drive connectors
  • Two cables supplied for multi-card setups

SATA-to-PCIe Power Adapter for Video Cards

This 15-pin SATA to 6-pin PCI-Express adapter cable lets you power a video card using existing SATA power connectors inside your computer. It is designed for builders who lack enough native PCIe power connectors to run their graphics card. The 20cm length provides a direct link between the power supply and the component. Two cables are included in the pack.

Replaces Missing Native PCIe Connectors

The adapter eliminates the need to upgrade your existing power supply when it lacks sufficient 6-pin PCIe outputs for a new video card. It bridges the gap by converting spare SATA power leads into the required PCIe format. The jump is worth it when your power supply has adequate wattage and spare SATA connectors but missing the specific PCIe plugs. It also reduces physical strain on hard-to-reach internal connectors during installation.

Limited by SATA Connector Current Rating

The practical limit of this interface is the current capacity of the SATA power connector, which is lower than a native PCIe 6-pin connector rated for higher amperage. Drawing excessive power through the adapter can overload the SATA pins or the power supply's SATA rail. It is not suitable for high-power graphics cards that demand more current than the SATA specification safely delivers. Buyers who need to power high-wattage GPUs should not use this adapter.

Highlights

  • Powers a PCIe video card from a SATA connector
  • 15 pin SATA to 6 pin PCIe adapter included
  • 20 cm cable length keeps routing tidy
  • Reduces strain on motherboard and drive connectors
  • Two cables supplied for multi-card setups

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 20 cm cable need behind the graphics card?

The adapter is 20 cm long, so allow roughly that depth behind the 6-pin PCI-Express connector for a gentle bend without stressing the port.

Which connector do I attach first when installing the SATA 15-pin to 6-pin adapter?

Plug the 15-pin SATA end into the power supply cable first, then connect the 6-pin side to the video card to avoid bending the shorter adapter under tension.

When should I replace the two adapter cables in the pack?

Replace a cable if the SATA 15-pin or 6-pin connector feels loose, shows discoloured pins, or the insulation becomes brittle from heat cycles.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.