We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat ribbon cable with one 15 pin SATA male plug splitting to five female plugs

Vszerda

Vszerda 15 Pin SATA Power Extension Cable 1 Male to 5 Female Splitter 24 inch 60cm 18AWG

SKU CH-MYAR-6ASC0

Splits one 15-pin SATA power connector into five to run 2.5" SSDs, 3.5" HDDs and optical drives from a single PSU lead

  • Powers up to five drives from one SATA connector
  • 60 cm total length with staggered 10 cm branches for tidy routing
  • 18 AWG tin-coated copper handles 3.3 V, 5 V and 12 V without loss
  • Works with 2.5″ SSDs, 3.5″ HDDs and optical drives
  • Includes self-adhesive tape for secure cable management

SATA power splitter for five drives

This 15-pin SATA power cable turns one male connector into five female connectors, letting you run up to five drives from a single power-supply lead. The 24-inch assembly uses 18AWG tin-coated copper wire rated for 3.3V, 5V and 12V. It suits builders adding multiple 2.5-inch SSDs, 3.5-inch HDDs or optical drives without free PSU cables.

Replaces daisy-chain or short OEM leads

Use it when your power supply lacks enough native SATA plugs or the existing cables cannot reach every drive bay. The staggered 8-inch, 4-inch, 4-inch, 4-inch, 4-inch spacing fits typical mid-tower layouts. The jump is worth it if you are installing several drives at once and want a single tidy run instead of multiple extensions.

Check connector keying and device voltage

Verify every target device uses a standard 15-pin SATA power port; the supplier warns that forcing this cable into an incompatible port will burn components. Ensure your power supply can deliver the combined current draw of all attached drives. The included self-adhesive tape helps secure the cable run inside the case.

Highlights

  • Powers up to five drives from one SATA connector
  • 60 cm total length with staggered 10 cm branches for tidy routing
  • 18 AWG tin-coated copper handles 3.3 V, 5 V and 12 V without loss
  • Works with 2.5″ SSDs, 3.5″ HDDs and optical drives
  • Includes self-adhesive tape for secure cable management

Specifications

No published specifications for this item yet.

Questions about this item

What clearance is needed for the 24-inch splitter with 8-inch lead and four 4-inch branches?

The cable measures 60 cm overall: a 20 cm lead to the first female connector, then four 10 cm segments between the five SATA power plugs.

How do I attach the 15-pin male plug to the PSU and secure the five female connectors?

Push the keyed 15-pin male into the PSU SATA power port until it clicks; press each 15-pin female onto the drive until seated, then use the included self-adhesive tape to anchor the cable run.

When should the 18 AWG 1007 cable be replaced?

Replace the splitter if the tin-coated copper conductors show cracking, the 15-pin housings become loose, or voltage drop appears on the 3.3 V, 5 V or 12 V rails under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.