We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 12VHPWR power bridge with 180-degree angled 12+4 pin connector, 23mm low-profile design

Vszerda

Vszerda 12VHPWR Power Bridge White 180° internal power cable

SKU CH-YR2H-9MKPZ

A 180° 12+4 pin power bridge for RTX40 Series GPUs, extending just 23 mm to clear side panels while delivering up to 450 W

  • Low-profile 23 mm design clears side panels easily
  • 180-degree angled connector fits tight chassis layouts
  • Strengthened PCB avoids wire bending and thermal risk
  • Supports up to 450 W for compatible graphics cards
  • PCIe 5.0 12+4 pin connector standard

12VHPWR Power Bridge for PCIe 5.0 GPUs

This Vszerda internal power cable is a 12+4 pin angled adapter built for PCIe 5.0 graphics cards. It solves clearance issues where standard cables protrude too far and prevent the side panel from closing. The 180-degree angle provides a compact layout for tight builds.

Who This Suits and Who Should Look Elsewhere

This adapter suits builders fitting high-power GPUs into compact chassis with less than 23mm side-panel clearance. It is not for systems drawing more than 450W through the connector or for cases lacking adequate ventilation. Buyers needing a 90-degree routing option should choose the other variant.

450W Maximum Power Rating

The single specification that decides compatibility is the 450W maximum power output capacity. Exceeding this limit risks overheating and component damage. Verify your graphics card's power draw stays within this threshold before installation.

Highlights

  • Low-profile 23 mm design clears side panels easily
  • 180-degree angled connector fits tight chassis layouts
  • Strengthened PCB avoids wire bending and thermal risk
  • Supports up to 450 W for compatible graphics cards
  • PCIe 5.0 12+4 pin connector standard

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 180-degree connector need between the GPU and the side panel?

The low-profile design extends 23mm from the graphics card, so you must verify at least a 23mm gap between the GPU and the side panel before installing.

What is the correct way to insert the 12+4 pin connector so the 180-degree angle sits properly?

Align the keyed 12+4 pin plug with the GPU socket and press straight in until the latch clicks; the strengthened PCB handles the turn without any wire bending.

When should the adapter be replaced to avoid overheating?

The bridge is rated for 450W maximum output; replace it if your GPU power draw exceeds that limit or if the adapter shows any discoloration or melting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.