We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 12+4 pin connector angled 90 degrees to three 8-pin plugs

Vszerda

Vszerda 12VHPWR ATX 3.0 PCIe 5.0 to 3x ATX 8P 90° internal power cable

SKU CH-Y0EG-FDNSD

Connects a 12VHPWR graphics card to three ATX 8-pin cables with a 90-degree angled plug for tight chassis clearance

  • 90° angled connector fits tight GPU clearances
  • 12VHPWR 12+4 pin supports PCIe 5.0 graphics cards
  • Delivers up to 600 W via PCI‑SIG H+ spec
  • Splits one 16‑pin into three 8‑pin ATX feeds
  • Compatible with RTX 3090 Ti 4070 Ti 4080 4090

12VHPWR angled adapter for high-power GPUs

This Vszerda adapter converts a single 12+4 pin 12VHPWR connection into three standard ATX 8-pin plugs. It is built for graphics cards that follow the ATX 3.0 and PCIe 5.0 specifications, such as the RTX 3090 Ti, 4070 Ti, 4080 and 4090. The 90-degree upward angle eases routing in tight spaces around the card's power socket.

90-degree connector clears side-panel room

The right-angled head lets the cable sit flush against the GPU, freeing millimetres between the card and the case side panel. This helps builders fit wider graphics cards into narrower chassis without bending wires sharply. Three separate 8-pin tails connect directly to a modular power supply, so no extra splitters or daisy-chained cables are required inside the case.

600-watt delivery with PCI-SIG H+ signalling

The cable carries the full 12-pin power path plus the 4-pin sense lines defined by the PCI-SIG 12VHPWR H+ standard, supporting up to 600 W of continuous power. It matches the needs of current flagship RTX cards and the upcoming 5090 class. Builders using power supplies that only offer 8-pin PCIe outputs gain a certified path without exceeding the adapter's rated headroom.

Highlights

  • 90° angled connector fits tight GPU clearances
  • 12VHPWR 12+4 pin supports PCIe 5.0 graphics cards
  • Delivers up to 600 W via PCI‑SIG H+ spec
  • Splits one 16‑pin into three 8‑pin ATX feeds
  • Compatible with RTX 3090 Ti 4070 Ti 4080 4090

Specifications

No published specifications for this item yet.

Questions about this item

How much continuous power can the 12VHPWR connector deliver to a GeForce RTX 4090?

The PCI-SIG 12VHPWR H+ connector is rated to deliver up to 600W of power to the graphics card.

Does the 90-degree angled plug run hotter or louder than a straight connector under full load?

The adapter is a passive cable with no active components, so it adds no fan noise and generates no extra heat beyond normal conduction.

What power-supply connectors must I already have to use this three-way splitter?

Your power supply needs three available ATX 8-pin PCIe power outputs to feed the adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.