We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
90-degree 12VHPWR 16-pin to dual 8-pin sleeved extension cable 15cm

Vszerda

Vszerda 12VHPWR 90 Degree 2x 8Pin to 16Pin PCI-E 5.0 Extension Type B 15CM internal power cable

SKU CH-744D-8DJKV

Connects a 12VHPWR graphics card to two 8-pin PSU cables with a 90-degree Type B plug at 15 cm length

  • 90-degree right-angle connector eases tight GPU clearance
  • 16 AWG tinned copper conductors support up to 600 W delivery
  • PCIe 5.0 12VHPWR 16-pin interface matches RTX 3090 Ti 4070 Ti 4080 4090
  • 15 cm sleeved extension keeps cable routing tidy
  • Requires two free 8-pin PCIe ports on the power supply

12VHPWR 90 Degree Type B Cable

This Vszerda 12VHPWR 90 Degree adapter connects a graphics card with a 16-pin 12+4 connector to a power supply using two 8-pin PCIe cables. The right-angle Type B orientation suits cards where the connector points toward the motherboard. It is built with 16AWG tinned copper wire and rated for PCIe 5.0 power delivery.

Builders needing Type B right-angle fit

This cable suits builders installing an RTX 3090 Ti 4070 Ti 4080 4090 or similar 12VHPWR card where the socket requires a Type B 90-degree bend. It will not work if your power supply has fewer than two free 8-pin PCIe ports or if your card needs a Type A orientation.

600 W rating on 16AWG wire

The cable uses 16AWG tinned copper conductors specified for up to 600 W output. This single rating determines whether the extension can handle the power draw of your graphics card under load.

Highlights

  • 90-degree right-angle connector eases tight GPU clearance
  • 16 AWG tinned copper conductors support up to 600 W delivery
  • PCIe 5.0 12VHPWR 16-pin interface matches RTX 3090 Ti 4070 Ti 4080 4090
  • 15 cm sleeved extension keeps cable routing tidy
  • Requires two free 8-pin PCIe ports on the power supply

Specifications

No published specifications for this item yet.

Questions about this item

My PSU only has one free 8-pin PCIe port — will this 12VHPWR 2x 8-pin to 16-pin Type B adapter still deliver 600 W?

No, the adapter needs two unoccupied 8-pin PCIe ports on the power supply to function and provide up to 600 W.

I am keeping an RTX 3090 Ti — does the 90-degree Type B 16-pin connector fit that card without blocking the case side panel?

The 90-degree Type B 16-pin male connector is designed for RTX 3090 Ti, 4070 Ti, 4080 and 4090 cards; verify your GPU's 12+4-pin orientation matches Type B before installing.

After routing the 15 cm extension, how can I confirm the 12VHPWR link is seated and delivering power correctly?

Ensure both 8-pin plugs are fully latched on the PSU side and the 16-pin Type B connector clicks into the GPU; the system should POST and the graphics card should initialise normally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.