We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 16-pin 90-degree UP angled adapter with 12 power pins and 4 signal pins

Vszerda

Vszerda 12VHPWR 16Pin 90 Degree UP Angled Adapter internal power cable

SKU CH-QFS0-J0JP4

90-degree UP angled 12VHPWR 16-pin adapter clears side-panel space for wide PCIe 5.0 graphics cards and delivers up to 600W

  • Fits super-wide GPUs in narrow cases thanks to 90 degree up angle
  • Connects easily in tight spaces with angled 16 pin design
  • Delivers up to 600 W via PCI-SIG 12VHPWR H+ connector
  • Supports PCIe 5.0 and ATX 3.0 graphics cards including RTX 40 series
  • Compatible with 3080 and 3090 TI models using 12VHPWR power

Angled 12VHPWR Adapter

The Vszerda 12VHPWR 16-pin 90-degree UP angled adapter is a new internal power cable built to the PCI-SIG H+ specification. It connects an ATX 3.0 power supply to graphics cards using the 12VHPWR connector. The angled design adds clearance between the GPU and the side panel.

Build Integration

The 90-degree upward angle routes the cable toward the motherboard, freeing lateral space inside narrower chassis. It plugs into a female 12VHPWR port on the graphics card even when surrounding components limit straight access. The connector includes twelve power terminals and four signal terminals and supports up to 600W delivery.

Suitability

This adapter suits builders fitting wide RTX 40-series or AMD RDNA 3 cards into cases where a straight connector would press against the glass. It is not for systems that lack a native 12VHPWR output on the power supply. Buyers needing a native PSU cable or a different bend direction should look elsewhere.

Highlights

  • Fits super-wide GPUs in narrow cases thanks to 90 degree up angle
  • Connects easily in tight spaces with angled 16 pin design
  • Delivers up to 600 W via PCI-SIG 12VHPWR H+ connector
  • Supports PCIe 5.0 and ATX 3.0 graphics cards including RTX 40 series
  • Compatible with 3080 and 3090 TI models using 12VHPWR power

Specifications

No published specifications for this item yet.

Questions about this item

Does the 12VHPWR 16-pin connector support sustained 600 W delivery under PCI-SIG H+ spec?

Yes, the adapter follows the PCI-SIG 12VHPWR H+ specification with 12 power pins and 4 signal pins, rated for up to 600 W continuous delivery to PCIe 5.0 graphics cards.

How much heat does the 90-degree UP angled adapter generate during all-day operation at full load?

The adapter is a passive connector with no active components, so it adds negligible heat; thermal load stays within the cable and GPU cooler under normal 600 W operation.

Which power-supply cables must I already have to plug this adapter into my PSU?

You need a modular PSU with native 12VHPWR or 12+4 pin PCIe 5.0 cables; the adapter connects directly to that female port without extra converters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.