We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White sleeved 12VHPWR 16-pin modular GPU cable with clear combs

Vszerda

Vszerda 12VHPWR 16-pin sleeved modular cable 700 mm white

SKU CH-0BYK-Z53HV

A 700 mm white sleeved 12VHPWR 16-pin cable with 16 AWG copper wire and four comb clips for RTX 3090 Ti, 4080 and 4090 graphics cards

  • Designed for RTX 3090Ti 4080 4090 with PCI-E 5.0 12VHPWR connector
  • 700 mm length gives 2.3 ft of routing flexibility inside the case
  • 16 AWG copper conductor rated for 600 W power delivery
  • Four transparent acrylic combs keep the 12+4 pin sleeved cable neatly organised
  • Three-layer braid insulation protects the 16 AWG wires and prevents fire escape

PCI-E 5.0 12VHPWR GPU cable

This sleeved modular cable delivers 12VHPWR power to RTX 3090 Ti, 4080 and 4090 graphics cards. It uses 16 AWG copper conductors rated for 600 W output and measures 700 mm end to end. The white braided sleeve adds a clean look inside the case.

Male-to-male 16-pin connectors with combs

Both ends carry a 12+4 pin 12VHPWR plug built to the PCI-E 5.0 specification. Three protective layers — braid, insulator and conductor plating — guard against heat and oxidation. Four transparent acrylic combs clip onto the cable for tidy routing without stressing the sense wires.

Four cable combs included for routing

The pack supplies four dedicated 12+4 pin combs that slide along the sleeve to align the cable run. They simplify cable management and keep the build looking organised. The cable will not work with older 6-pin or 8-pin PCIe sockets or with the 12-pin female connector found on some earlier cards.

Highlights

  • Designed for RTX 3090Ti 4080 4090 with PCI-E 5.0 12VHPWR connector
  • 700 mm length gives 2.3 ft of routing flexibility inside the case
  • 16 AWG copper conductor rated for 600 W power delivery
  • Four transparent acrylic combs keep the 12+4 pin sleeved cable neatly organised
  • Three-layer braid insulation protects the 16 AWG wires and prevents fire escape

Specifications

No published specifications for this item yet.

Questions about this item

Does the PCI-E 5.0 12VHPWR cable support 600 W delivery for RTX 4090?

Yes, the 16 AWG conductors are rated for 600 W output, matching the PCI-E 5.0 12VHPWR specification used by RTX 4090 and 4080 cards.

What clearance does the 700 mm sleeved cable with 3 mm diameter and four acrylic combs need behind the GPU?

Allow at least 30 mm behind the 12+4 pin connector for the braided sheath and combs; the 700 mm length suits most mid-tower and full-tower cases.

How do I install the 12+4 pin combs without damaging the sense wires?

Slide each comb slowly along the sleeved wires — never force it — then seat the 12VHPWR plug fully into the GPU until the latch clicks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.