We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 12+4 pin 180 degree slim angle connector with aluminum shell

Vszerda

Vszerda 12VHPWR 12+4 Pin Angle Connector Slim 180° STD Black internal power cable

SKU CH-YXJV-XDY5Q

Slim 12+4-pin 180° adapter routes graphics card power cables tight to the card, supports 600 W and needs 16.3 mm clearance

  • Slim aluminium shell fits tight ITX builds while keeping airflow clear
  • 180° PCB bend removes wire stress for full terminal contact
  • 600 W rating backed by alloy-copper terminals and aluminium heatsink
  • 3 mm minimum side-panel clearance lets case close cleanly
  • Compatible with 4090 4080 4070 Ti graphics cards

12VHPWR 12+4 Pin Angled Adapter

This slim aluminium-shell adapter bends the 12VHPWR connection through 180 degrees so the cable runs parallel to the graphics card. It is built for builders who need to close a side panel in a tight chassis. The strengthened PCB keeps every terminal in full contact without bending the wires themselves.

ITX and compact-case builders

The adapter suits systems where the gap between the card and the side panel is at least 16.3 mm. Builders whose cases leave less clearance, or who use a graphics card without a 12VHPWR socket, will not be able to install it. No other form-factor or cable-routing constraint is addressed by this part.

600 W current rating

The connector is rated for 600 W continuous delivery through its alloy-copper terminals. An integrated aluminium heatsink with ventilation holes dissipates the heat generated at that load. If your power supply or graphics card demands more than 600 W through a single 12VHPWR connection, this adapter cannot meet that requirement.

Highlights

  • Slim aluminium shell fits tight ITX builds while keeping airflow clear
  • 180° PCB bend removes wire stress for full terminal contact
  • 600 W rating backed by alloy-copper terminals and aluminium heatsink
  • 3 mm minimum side-panel clearance lets case close cleanly
  • Compatible with 4090 4080 4070 Ti graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 180-degree adapter is seated correctly after installation?

Confirm the slim aluminium shell sits flush against the card, the strengthened PCB makes full terminal contact without wire bending, and the side panel closes with at least 16.3 mm clearance from the graphics card.

What comes in the box and what must I source separately?

The package contains the 12VHPWR 12+4 pin angle connector with aluminium heat sink and ventilation holes; you must provide a compatible ATX 3.0 power supply cable to plug into the adapter.

Which version of the Vszerda angled connector should I select for my build?

Only the 180-degree STD slim type in black is listed, rated for 600 W output and designed for cards requiring a 12+4 pin connection such as the 4090, 4080 and 4070 Ti models.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.