We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 90-degree 12VHPWR power bridge with low-profile 23mm angled connector

Vszerda

Vszerda 12VHPWR 12+4 Pin 90° Power Bridge White

SKU CH-42WM-GJ1CH

A 12+4 pin 90-degree power bridge with a 23 mm low profile for PCIe 5.0 graphics cards up to 450 W

  • 90° angled connector clears 23 mm for side-panel fit
  • Strengthened PCB avoids wire bending and keeps full terminal contact
  • Rated 450 W maximum to prevent overheating
  • Low-profile design suits compact chassis and large GPUs
  • PCIe 5.0 12+4 pin standard supports 4090, 4080, 4070

12VHPWR 12+4 Pin 90° Power Bridge

The Vszerda PCIe 5.0 12VHPWR GPU Power Bridge is a white angled adapter that connects a 12+4 pin cable to compatible graphics cards. Its strengthened PCB design allows a 90-degree turn without bending wires, preserving full terminal contact and reducing thermal risk from tight bends.

For compact chassis with limited side-panel

The low-profile adapter extends only 23 mm from the card, helping builders close side panels in tight cases. It is rated for a maximum of 450 W, so systems drawing more power should not use this bridge. Buyers must verify at least 23 mm of space between the GPU and the panel before installing.

Maximum 450 W power rating

The single specification that determines suitability is the 450 W limit. If the graphics card or power supply configuration exceeds this threshold, the adapter can overheat and cause damage. Confirm the total power draw stays within 450 W before purchasing.

Highlights

  • 90° angled connector clears 23 mm for side-panel fit
  • Strengthened PCB avoids wire bending and keeps full terminal contact
  • Rated 450 W maximum to prevent overheating
  • Low-profile design suits compact chassis and large GPUs
  • PCIe 5.0 12+4 pin standard supports 4090, 4080, 4070

Specifications

No published specifications for this item yet.

Questions about this item

What power supply cable must I already have to connect this 12+4 pin bridge?

You need a standard 12VHPWR cable from an ATX 3.0 or PCIe 5.0 power supply to plug into the bridge.

Will the 90° white adapter fit a 4080 that I am keeping?

The bridge is listed as compatible with the 4080 and its 90° angle adds 23 mm of clearance toward the side panel.

How can I confirm the bridge is seated correctly after installation?

The strengthened PCB should sit flush at the 90° angle with no wire bending and all 12+4 pins fully engaged in the GPU socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.