We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 12+4 pin 90 degree adapter with aluminum heatsink and ventilation holes

Vszerda

Vszerda 12VHPWR 12+4 Pin 90° Angle Adapter 600W Black

SKU CH-CTMH-039ZG

90-degree angled 12VHPWR adapter routes power cables close to the graphics card for cases with at least 26 mm clearance and supports 600 W delivery

  • Strengthened PCB design prevents wire bending and ensures full terminal contact
  • Fits builds with over 26 mm clearance between side panel and graphics card
  • Alloy copper terminals deliver stable conductivity under sustained high-load operation
  • Aluminium heat sink with ventilation holes supports 600 W continuous power delivery
  • 90-degree STD connector routes power cable close to the card for tidy cable management

12VHPWR 90° Adapter for 40 Series

This Vszerda 12VHPWR 12+4 Pin adapter provides a 90-degree angled connection for 40 series graphics cards. The strengthened PCB design avoids wire bending and ensures full terminal contact. It supports 600W output with an aluminium heat sink and ventilation holes.

Clearance Solution for Tight Cases

Builders who cannot close their side panel because the power cable protrudes too far will benefit from this adapter; a minimum 26mm gap between the side plate and the graphics card is required. Users with ample clearance or who prefer a straight cable run should look elsewhere.

12VHPWR 12+4 Pin Connector Standard

The single specification that decides compatibility is the 12VHPWR 12+4 pin interface on the graphics card. This model is the STD type with a 90-degree angle; the RVS type or 180-degree version will not fit the same orientation.

Highlights

  • Strengthened PCB design prevents wire bending and ensures full terminal contact
  • Fits builds with over 26 mm clearance between side panel and graphics card
  • Alloy copper terminals deliver stable conductivity under sustained high-load operation
  • Aluminium heat sink with ventilation holes supports 600 W continuous power delivery
  • 90-degree STD connector routes power cable close to the card for tidy cable management

Specifications

No published specifications for this item yet.

Questions about this item

What clearance do I need between the side panel and the graphics card for the 90-degree STD adapter?

You need more than 26 mm between the side plate and the graphics card for this 90-degree STD type adapter to fit.

How do I install the 12VHPWR 12+4 pin 90-degree adapter and what step is often missed?

Plug the adapter into the graphics card 12VHPWR socket first, then connect your PSU cable; the step often missed is verifying the STD orientation matches your card before seating it fully.

What maintenance or replacement will the 600 W alloy-copper terminal adapter need later?

Periodically check that the alloy copper terminals stay clean and fully seated; the aluminium heatsink and ventilation holes handle heat, so no scheduled replacement is required unless physical damage occurs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.