We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 12+4 pin 180 degree angled power adapter with aluminum heatsink

Vszerda

Vszerda 12VHPWR 12+4 Pin 180° STD Black internal power cable

SKU CH-5336-TTPK1

Angled 12+4-pin power adapter supports 600 W delivery and fits 180-degree layouts with 26 mm clearance for 40-series graphics cards

  • 180-degree angle connector enables compact builds in tight spaces
  • Strengthened PCB design eliminates wire bending for reliable terminal contact
  • Supports 600W output with aluminum heat sink and ventilation holes for thermal stability
  • High-quality alloy copper terminals ensure stable conductivity under high loads
  • Requires minimum 26mm clearance between side panel and graphics card

12VHPWR 180° STD Black Adapter

This Vszerda internal power cable is a 12VHPWR 12+4 pin adapter with a 180-degree STD connector finished in black. It is designed for builders who need to connect an ATX 3.0 power supply to a compatible graphics card while routing the cable flat against the PCB.

Fits tight clearances above 26 mm; not for 90° needs

The adapter suits systems where the side panel sits more than 26 mm from the graphics card and a straight-out cable would prevent closure. Buyers who need a 90-degree bend direction or an RVS pin orientation should look at a different variant.

600 W rated with aluminium heatsink

The single specification that decides fitment is the 600 W current rating backed by an integrated aluminium heatsink and ventilation holes. If your build demands more than 600 W through the 12VHPWR connection, this adapter will not meet the requirement.

Highlights

  • 180-degree angle connector enables compact builds in tight spaces
  • Strengthened PCB design eliminates wire bending for reliable terminal contact
  • Supports 600W output with aluminum heat sink and ventilation holes for thermal stability
  • High-quality alloy copper terminals ensure stable conductivity under high loads
  • Requires minimum 26mm clearance between side panel and graphics card

Specifications

No published specifications for this item yet.

Questions about this item

What does the 600 W rating mean once the adapter is installed in a build?

The adapter is rated for 600 W continuous output and uses an aluminium heatsink with ventilation holes to keep temperatures stable under sustained high-current load.

How does the 12VHPWR 12+4 pin connector and 180° STD orientation affect compatibility?

The 180° STD angle routes the cable straight back from the card, reducing protrusion so the side panel can close when at least 26 mm of clearance exists between the panel and the graphics card.

What physical space is needed for the adapter to fit and mount properly?

A minimum 26 mm gap between the case side panel and the graphics card is required for the 180° STD adapter to sit without bending the cable or preventing the panel from closing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.