We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular fan hub with eight 3-pin headers and SATA power connector

Vszerda

Vszerda 12 V 3-pin 8-way SATA fan splitter internal power cable

SKU CH-85HR-QVJXJ

An eight-channel SATA-powered hub runs multiple 12 V 3-pin fans simultaneously with manual speed control and adhesive mounting

  • Expands one motherboard header to eight 12 V 3-pin fans
  • SATA power connector supplies all connected fans simultaneously
  • Double-sided adhesive pad secures the hub inside the chassis
  • Manual speed switch selects full speed, low speed or off
  • Simple plug-in installation with no software required

8-Channel SATA Fan Hub

The Vszerda splitter connects up to eight 12 V three-pin fans to a single SATA power connector. It draws power directly from the PSU, removing the load from the motherboard headers. A double-sided adhesive pad secures the compact hub inside the chassis.

Builders needing simple voltage control

The hub lacks PWM circuitry and tachometer feedback, so fan speed is set manually at the unit. It suits systems where constant or manually switched speeds are acceptable. Builders who require automatic motherboard-controlled curves or RPM monitoring should look elsewhere.

Integrates with standard ATX power

A spare SATA cable from the power supply feeds the hub, freeing motherboard fan headers for other devices. The three-pin connectors accept common 12 V case fans without adapters. No additional controllers or software are required for operation.

Highlights

  • Expands one motherboard header to eight 12 V 3-pin fans
  • SATA power connector supplies all connected fans simultaneously
  • Double-sided adhesive pad secures the hub inside the chassis
  • Manual speed switch selects full speed, low speed or off
  • Simple plug-in installation with no software required

Specifications

No published specifications for this item yet.

Questions about this item

Do I need a spare SATA power connector from my PSU to run this 8-way fan splitter?

Yes, the hub draws power through a SATA connector from the PSU, so one free SATA power lead is required.

Can I keep using my existing 12 V 3-pin case fans with this hub?

The splitter is designed for 12 V 3-pin fans and provides eight channels for them to run simultaneously.

How can I verify the fans are spinning at the speed I selected on the hub?

The hub has a manual gear switch for full speed, low speed or off; you can confirm operation by watching fan rotation or checking RPM in BIOS.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.