We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with M-Key edge connector and two 20-pin Type-E headers

Vszerda

Vszerda 10Gbps NVME M-Key to Dual USB 3.1 20pin Type-E Adapter

SKU CH-WYPK-S578C

Converts an NVME M-Key slot into dual USB 3.1 20-pin Type-E front-panel headers at 10 Gbps

  • Adds dual front-panel USB 3.1 Type-E ports via an M-Key slot
  • Delivers 10 Gbps bandwidth through each 20-pin header
  • Plugs straight into the motherboard with no extra cables or brackets
  • Converts an unused NVME M-Key into two USB 3.1 headers
  • Enables case USB-C ports on boards lacking native front-panel headers

Compact NVME M-Key adapter

This Vszerda adapter converts an available NVME M-Key slot on a motherboard into dual USB 3.1 20-pin Type-E front-panel headers. The compact board plugs directly into the M-Key slot and requires no extra cables or brackets. It delivers up to 10 Gbps bandwidth across the two headers.

Builders adding front-panel USB-C

The adapter suits system builders whose motherboard lacks native USB 3.1 front-panel headers but has a spare NVME M-Key slot. It enables Type-C front-panel ports on cases that provide them. It does not support video, audio or Power Delivery, so users needing DisplayPort Alt Mode or PD charging should look elsewhere.

Capacity and headroom

Each header runs at USB 3.1 speeds, sharing the 10 Gbps link from the single M-Key lane. Everyday external SSDs and high-speed flash drives operate comfortably within this bandwidth. Sustained transfers from multiple high-performance NVME-based enclosures simultaneously will saturate the link and reduce per-port throughput.

Highlights

  • Adds dual front-panel USB 3.1 Type-E ports via an M-Key slot
  • Delivers 10 Gbps bandwidth through each 20-pin header
  • Plugs straight into the motherboard with no extra cables or brackets
  • Converts an unused NVME M-Key into two USB 3.1 headers
  • Enables case USB-C ports on boards lacking native front-panel headers

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need an NVME M-Key slot to use this adapter?

Yes, the adapter plugs directly into an NVME M-Key slot on the motherboard and requires no extra attachments.

Will this adapter work with a case that only has USB 3.1 20-pin Type-E front panel headers?

The adapter provides two USB 3.1 20-pin Type-E headers, so it can supply those front-panel ports even if the motherboard lacks native USB 3.1 headers.

How can I confirm the adapter is delivering the advertised 10 Gbps speed after installation?

Connect a USB 3.1 storage device to the front-panel port and run a benchmark; sustained transfer rates near 10 Gbps indicate the link is operating as intended.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.