We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 10 cm flat cable linking an M.2 NVMe slot to a PCIe x1 connector with a magnetic LED pad

Vszerda

Vszerda 10cm M.2 NVMe to PCIe x1 Riser Cable with Magnetic Pad LED Power for 2230 2242 2260 2280 SSD

SKU CH-TNKR-A3PRR

Connects M.2 NVMe SSDs in 2230, 2242, 2260 and 2280 sizes to a PCIe x1 slot using a 10 cm riser cable with magnetic pad and LED power indicator

  • Connects M.2 NVMe SSD to PCIe x1 slot
  • 10 cm cable enables flexible internal routing
  • Magnetic pad secures SSD without screws
  • LED power indicator shows drive activity
  • Supports 2230 2242 2260 2280 form factors

10 cm M.2 NVMe to PCIe x1 riser

The 10 cm cable converts an M.2 NVMe SSD into a PCIe x1 device. It accepts 2230, 2242, 2260 and 2280 form factors. A magnetic pad holds the drive in place while an LED indicates power status. Builders use it to add NVMe storage to slots that only offer a single PCIe lane.

Sustained transfer limited to one lane

The PCIe x1 link caps bandwidth so long sequential reads and writes run at lane speed rather than the drive’s peak. Thermal throttling is not introduced by the cable itself. The assembly suits workloads that value drive relocation over maximum throughput. Users who need full x4 bandwidth should choose a different adapter.

Highlights

  • Connects M.2 NVMe SSD to PCIe x1 slot
  • 10 cm cable enables flexible internal routing
  • Magnetic pad secures SSD without screws
  • LED power indicator shows drive activity
  • Supports 2230 2242 2260 2280 form factors

Specifications

No published specifications for this item yet.

Questions about this item

Does the 10 cm riser cable generate noticeable heat or draw extra power during continuous operation?

The passive 10 cm cable adds no active components, so it does not produce additional heat or increase power draw beyond the NVMe SSD itself.

What motherboard slot and SSD form factors are required for this adapter to work?

You need a free PCIe x1 slot and an M.2 NVMe SSD in 2230, 2242, 2260 or 2280 size; the magnetic pad holds the drive in place.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.