We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular RJ45 splitter with USB power cable

Vszerda

Vszerda 1000Mbps Ethernet Splitter 1 to 2 with USB Power Cable

SKU CH-C0Y3-4WKDV

A powered 1-to-2 RJ45 splitter lets two devices share one Gigabit Ethernet line at up to 1000 Mbps each

  • Splits one Ethernet line for two devices simultaneously
  • Each port delivers up to 1000 Mbps throughput
  • Works with Cat5 through Cat8 cables
  • Built-in PCB board for durable operation
  • USB power cable included for reliable performance

Instant dual-device networking

This Vszerda Gigabit Ethernet splitter turns a single RJ45 port into two simultaneous 1000 Mbps connections for computers, laptops, TVs or routers. It solves the common problem of insufficient wall ports or switch ports without any configuration or software installation. The compact adapter works with Cat5 through Cat8 cables and is ready to use the moment you plug it in.

Passive cooling with mandatory USB power

The unit draws its operating power from the included 0.8 m USB charging cable and cannot function without that connection. A built-in thick environmental-protection PCB handles the signal splitting without active cooling, so the device runs silently and adds no fan noise to the room. Each of the two output groups maintains a full 1000 Mbps throughput with no cross-talk between the channels.

Plug into any spare USB port for power

Connect one incoming Ethernet cable from your wall jack, switch or router to the splitter, then run two outgoing cables to the target devices and plug the USB lead into any convenient USB-A socket for power. The adapter frees you from pulling a second cable through walls or ceilings while supporting ADSL, hubs, switches and wireless gear alike. No extra networking hardware or driver setup is required.

Highlights

  • Splits one Ethernet line for two devices simultaneously
  • Each port delivers up to 1000 Mbps throughput
  • Works with Cat5 through Cat8 cables
  • Built-in PCB board for durable operation
  • USB power cable included for reliable performance

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the Vszerda 1000Mbps Ethernet Splitter, and what step is often missed?

Connect one Ethernet cable from the wall or router to the splitter input, then run one cable from each output to the two devices. The step often missed is plugging in the .8 m USB power cable — the splitter will not work without it.

What maintenance or replacement will the Vszerda splitter need over time?

No scheduled maintenance is required. If the USB power cable or the RJ45 ports become damaged, replace the entire splitter unit.

What limit appears first when both connected devices run sustained transfers?

Each output is rated for 1000 Mbps, but they share the single upstream link, so total throughput cannot exceed 1000 Mbps combined.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.