We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex splitter cable with two fan connectors, 10 inch length

Vszerda

Vszerda 10 inch Black Sleeved Molex to Dual 3Pin/4Pin Fan Power Cable

SKU CH-WPPR-4446D

Black sleeved Molex-to-dual-fan power splitter cable, 10 inch length, 12 V DC only, no PWM speed control

  • Powers two fans from one Molex connector
  • 12 V DC output for reliable fan operation
  • 10 inch length suits compact case layouts
  • Black sleeved jacket protects wires and reduces clutter
  • Does not transmit PWM speed control signals

Power Splitter for Case Fans

This Vszerda cable splits a single 4-pin Molex connector from a power supply into two 3-pin or 4-pin fan headers. It delivers a fixed 12V DC output to both ports. The 10 inch length suits typical case routing. It is intended for builders adding extra cooling without free motherboard headers.

Suits Molex-Powered Builds

The adapter works when the power supply has spare Molex leads and the fans accept 3-pin or 4-pin plugs. It does not pass PWM speed signals, so fans run at full voltage. Builders who need motherboard-controlled fan curves should look at a PWM-capable hub instead.

Sleeved Cable Only

The black sleeving protects wires and improves cable management appearance. No software, controllers or additional connectors are included. The splitter simply converts one Molex plug into two fan power taps.

Highlights

  • Powers two fans from one Molex connector
  • 12 V DC output for reliable fan operation
  • 10 inch length suits compact case layouts
  • Black sleeved jacket protects wires and reduces clutter
  • Does not transmit PWM speed control signals

Specifications

No published specifications for this item yet.

Questions about this item

Does my power supply need a free Molex connector to use this splitter?

Yes, the cable draws 12 V DC from a standard 4-pin Molex output on the PSU.

Will my older 3-pin fans run at full speed when plugged into the two ports?

The adapter supplies 12 V only and does not pass PWM signals, so 3-pin fans will spin at constant maximum speed.

How can I confirm the cable is delivering power after I connect it?

Both attached fans should spin immediately when the system powers on, showing the 12 V line is active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.