We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular controller with ten 4-pin fan headers, SATA power plug and rotary speed knob

Vszerda

Vszerda 10 Channel PWM Fan Speed Controller SATA internal power cable

SKU CH-9WZC-WJ762

A 10-channel PWM fan hub powered by a SATA 15-pin connector lets you adjust up to ten 3-pin or 4-pin fans from 0% to 100% speed with a manual knob

  • Manual knob adjusts fan speed from 0% to 100%
  • Powers up to 10 PWM or 3-pin fans simultaneously
  • SATA 15-pin connector supplies 12 V to all channels
  • Fans can be shut down completely for silent operation
  • Self-adhesive backing secures hub inside any PC case

Ten-Channel PWM Fan Controller

The Vszerda unit connects to a SATA 15-pin power connector and provides ten headers that accept both 3-pin and 4-pin PWM case or CPU fans. Builders who want manual control over every chassis fan from a single hub will find it covers the full range of standard fan connectors. It is not suited for systems that rely on motherboard software curves or automatic thermal profiles.

Manual Knob Adjustment Under Load

A physical knob on the controller varies the output voltage from 0 V to 12 V, letting you set fan speed anywhere between 0 % and 100 % while the system runs. All ten channels respond together, so sustained workloads can be met with higher airflow or quieter operation at idle without rebooting. The device does not monitor temperatures itself, so it cannot react automatically when components heat up.

Adhesive Mount and Cable Routing

A self-adhesive pad secures the controller inside the case, leaving the SATA power lead and ten fan cables to be routed behind the motherboard tray. Installation is straightforward if the power supply has a free SATA connector and the case offers enough space for the bundle. Builders with fully modular PSUs lacking spare SATA leads or extremely tight cable channels may struggle to fit everything neatly.

Highlights

  • Manual knob adjusts fan speed from 0% to 100%
  • Powers up to 10 PWM or 3-pin fans simultaneously
  • SATA 15-pin connector supplies 12 V to all channels
  • Fans can be shut down completely for silent operation
  • Self-adhesive backing secures hub inside any PC case

Specifications

No published specifications for this item yet.

Questions about this item

How much heat and noise does the 10-channel PWM controller add when running all day?

The controller draws power from a SATA 15-pin connector and passes up to 12 V to the fans; it adds no active cooling of its own, so heat and noise come only from the attached fans themselves.

What must I already own to use this 10-way fan hub?

You need a free SATA 15-pin power lead from the PSU and up to ten 3-pin or 4-pin PWM case or CPU fans to plug into the hub.

Will the controller work with older 3-pin fans I want to keep?

Yes, the hub supports both 3-pin and 4-pin PWM fans, letting you adjust voltage from 0 V to 12 V via the knob for speed control on either type.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.