We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black braided cable with one 4-pin plug splitting to five 4-pin sockets

Vszerda

Vszerda 1-to-5 PWM fan hub cable 13 inch internal power cable

SKU CH-AJ6W-34HB8

A 13-inch sleeved PWM hub splits one motherboard header into five fan connections for 3-pin and 4-pin coolers

  • Connect up to five fans from one motherboard header
  • Works with both 4-pin PWM and 3-pin voltage-controlled fans
  • 13 inch braided nylon sleeving keeps the build tidy
  • Plug-and-play design requires no extra software or drivers
  • Extends reach between motherboard and CPU cooling fans

Five-fan PWM hub for compact builds

This Vszerda splitter connects up to five 4-pin or 3-pin case fans to a single motherboard header. The 13 inch black sleeved cable reduces clutter inside smaller chassis. It draws power directly from the board so no extra connectors are needed. Builders who want centralised speed control for multiple fans will find it straightforward.

Sustained operation with shared header current

All attached fans share the motherboard header’s current limit, so total draw must stay within that rating during long sessions. The nylon braided sleeve resists heat and abrasion from continuous airflow inside the case. PWM signals pass through to every connected fan for consistent speed regulation. The hub itself has no active components that could throttle under load.

Check header type and total fan current

Verify your motherboard provides a 4-pin PWM header rated for the combined amperage of every fan you plan to attach. Ensure the 13 inch reach spans the distance from that header to the furthest fan mounting point. The splitter only accepts standard 4-pin and 3-pin fan plugs, not proprietary connectors. Buyers who need more than five fans or a separate power source should look elsewhere.

Highlights

  • Connect up to five fans from one motherboard header
  • Works with both 4-pin PWM and 3-pin voltage-controlled fans
  • 13 inch braided nylon sleeving keeps the build tidy
  • Plug-and-play design requires no extra software or drivers
  • Extends reach between motherboard and CPU cooling fans

Specifications

No published specifications for this item yet.

Questions about this item

Does the 13 inch sleeved hub add noticeable heat or electrical load when five fans run all day?

The hub is a passive splitter with no active electronics, so it adds no measurable heat or power draw beyond the fans themselves.

What motherboard header is required to drive all five fans through this single 4-pin PWM connector?

One standard 4-pin PWM fan header on the motherboard supplies both the PWM signal and power for every connected fan.

If I mix older 3-pin fans with newer 4-pin models on the same hub, will speed control still work for the PWM fans?

Yes, the 4-pin fans retain PWM speed control while 3-pin fans run at the voltage present on the header; both types operate simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.