We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with 16-pin and 22-pin SATA connectors

Vszerda

Vszerda 1.8 inch Micro SATA 16PIN to 2.5 SATA 22PIN Adapter

SKU CH-NESD-NKVAZ

Connects a 1.8 inch Micro SATA 16PIN drive to a 2.5 inch SATA 22PIN interface

  • Connect 1.8 inch Micro SATA drives to 2.5 inch SATA ports using 16 to 22 pin conversion
  • Power and data signals carried through single adapter board for direct drive integration
  • Compact converter card fits tight laptop or embedded system bays without cable clutter
  • New condition ensures reliable contact surfaces for consistent SATA signal integrity

Connect 1.8 inch Micro SATA to 2.5 inch SATA

This adapter converts a 1.8 inch Micro SATA 16 pin drive to a standard 2.5 inch SATA 22 pin interface. It allows older or compact solid state drives to connect to laptop bays or desktop docks that expect the larger connector. The card handles both data and power lines in a single plug-in board.

Pin count decides compatibility

The 16 pin to 22 pin translation is the only specification that determines whether this part fits your drive and host. If your 1.8 inch SSD uses the Micro SATA 16 pin layout and your system provides a 2.5 inch SATA 22 pin socket the adapter will work. It is not for drives with ZIF ribbon cables or for native 2.5 inch drives that already have 22 pins.

Highlights

  • Connect 1.8 inch Micro SATA drives to 2.5 inch SATA ports using 16 to 22 pin conversion
  • Power and data signals carried through single adapter board for direct drive integration
  • Compact converter card fits tight laptop or embedded system bays without cable clutter
  • New condition ensures reliable contact surfaces for consistent SATA signal integrity

Specifications

No published specifications for this item yet.

Questions about this item

Will a 1.8 inch Micro SATA drive run at full SATA speed through the 16PIN to 22PIN adapter?

The adapter passes the native SATA signal from the 1.8 inch drive to a standard 2.5 inch connector, so the drive operates at its rated SATA transfer rate.

Does the 16PIN to 22PIN connector change the SATA revision or cap the link speed?

No, the pin conversion only rearranges power and ground lines; the SATA data lanes remain untouched, so the link negotiates at the drive's maximum SATA revision.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.