We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Mini SAS SFF-8087 male to four right-angle SATA female connectors, half-length black mesh sleeve, 1.64 ft

Vszerda

Vszerda 0.5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable with Net Jacket

SKU CH-5FF4-4GAY2

Connects a Mini SAS 36-pin SFF-8087 host controller to four SATA drives using a 90° breakout cable with 6Gbps per port

Cable Length 0.5m

  • Connect RAID controller to four SATA drives via SFF-8087 interface
  • 90° angled SATA connectors simplify routing in tight chassis spaces
  • 6Gb/s bandwidth per port supports high-throughput storage arrays
  • 30 AWG tinned copper drain wire reduces signal interference
  • 64 ft length with woven mesh sleeve protects cable runs

Host controller breakout

This 0.5 metre cable connects a RAID or PCIe controller with an SFF-8087 port to four discrete SATA drives. It provides reliable internal connectivity for direct-attached storage in a computer system. The forward breakout design spans controller arrays across two PCIe 2.0 x8 lanes with compatible host bus adapters.

Verify controller port and drive bays

Confirm the host card has an SFF-8087 male port with latch locking before ordering. Ensure the target drives or backplane accept standard SATA 7-pin female connectors. Check that the 90-degree angled plugs suit the drive bay orientation and that 1.64 feet of reach covers the internal routing path.

Fits standard drive cages and RAID cards

The woven mesh sheath covers half the cable length to simplify routing through tight chassis spaces. P1 to P4 markers on the SATA ends provide easy identification after installation. Each port supports up to 6Gbps data transfer, freeing the controller from single-drive bottlenecks. The 30 AWG tinned copper drain wire helps maintain signal integrity.

Highlights

  • Connect RAID controller to four SATA drives via SFF-8087 interface
  • 90° angled SATA connectors simplify routing in tight chassis spaces
  • 6Gb/s bandwidth per port supports high-throughput storage arrays
  • 30 AWG tinned copper drain wire reduces signal interference
  • 64 ft length with woven mesh sleeve protects cable runs

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable come with the four SATA drives or just the breakout assembly?

Only the breakout cable is included; the four SATA drives must be purchased separately.

When should I choose the 0.5 m length over a longer cable?

Choose 0.5 m when the RAID controller and backplane are in the same chassis or adjacent bays to keep airflow clear.

What does the 6 Gbps per port figure mean once the cable is installed?

Each of the four SATA connections can transfer up to 6 Gbps, matching the SATA 6 Gbps specification for compatible drives and controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.