VSEER 2 Prong Polarized Extension Cord Foot Switch 3A 125V 18AWG 6Ft
A 6-foot polarized extension cord with a built-in foot switch rated at 3 A and 125 V
- Standards/CertificationsUL Listed/CSA Certified
- Compatibility/FitmentAdhesives; Enamels; Epoxies
- Hands-free power control with integrated foot switch
- UL Listed and CSA Certified for verified safety
- 18 AWG copper conductors rated 3 A at 125 V
- Polarised 2-prong male-to-female connector prevents mis-insertion
- Six-foot SPT-2 cord reaches outlets without excess slack
Polarized Extension Cord with Foot Switch
This UL-listed 18 AWG cord adds a foot-operated on-off switch to any two-prong device rated up to 3 A at 125 V. The 6 ft SPT-2 cable carries a NEMA 1-15P plug to a matching NEMA 1-15R receptacle for indoor lamps, chargers or small appliances.
Installation and Common Issues
Plug the male end into a standard North American outlet and the device into the female receptacle; press the foot switch to toggle power. The polarized blades fit only one way, so forcing the plug can damage the blades or outlet. The cord is not rated for outdoor use or for loads above 375 watts.
3 A 125 V Current Rating
The 3 A, 125 V rating limits the cord to low-draw equipment such as LED lamps, phone chargers or small fans. Heaters, power tools or any appliance exceeding 375 watts will overload the switch and conductors. Buyers needing higher amperage or a grounded three-prong connection must choose a different cord.
Highlights
- Hands-free power control with integrated foot switch
- UL Listed and CSA Certified for verified safety
- 18 AWG copper conductors rated 3 A at 125 V
- Polarised 2-prong male-to-female connector prevents mis-insertion
- Six-foot SPT-2 cord reaches outlets without excess slack
Specifications
| Standards/Certifications | UL Listed/CSA Certified |
|---|---|
| Compatibility/Fitment | Adhesives; Enamels; Epoxies |
Questions about this item
How do I verify the foot switch is working after plugging it in?
Plug the cord into a 125 V outlet, connect a lamp or charger to the female end, then press the foot switch; the device should turn on and off cleanly with each press.
What comes in the box and is anything else needed?
The package contains the 6-foot 18 AWG SPT-2 extension cord with a polarized NEMA 1-15P male plug, a NEMA 1-15R female outlet and an integrated 3 A foot switch; no extra parts are required for indoor use.
Which version should I choose for a 375-watt load?
This single 6-foot, 18 AWG, 3 A, 125 V model is rated for 375 watts and suits typical indoor lamps, chargers and small appliances.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



